UMD Theses and Dissertations
Permanent URI for this collectionhttp://hdl.handle.net/1903/3
New submissions to the thesis/dissertation collections are added automatically as they are received from the Graduate School. Currently, the Graduate School deposits all theses and dissertations from a given semester after the official graduation date. This means that there may be up to a 4 month delay in the appearance of a given thesis/dissertation in DRUM.
More information is available at Theses and Dissertations at University of Maryland Libraries.
Browse
18 results
Search Results
Item NOVEL GRAPHENE HETEROSTRUCTURES FOR SENSITIVE ENVIRONMENTAL AND BIOLOGICAL SENSING(2024) Pedowitz, Michael Donald; Daniels, Kevin; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The COVID-19 pandemic has underscored the need for rapid, mobile, and adaptable sensing platforms to respond swiftly to pandemic-level emergencies. Additionally, smog and volatile organic compounds (VOCs), which posed significant health risks during last year’s wildfires, highlight the critical need for environmental air quality monitoring. Graphene, with its high sensitivity and fast response times, shows promise as a powerful sensing platform. However, it faces challenges related to low selectivity and the complexities of device fabrication using conventional chemical vapor-deposited graphene grown on metal foil, which requires exfoliation and transfer to suitable substrates.This dissertation explores the use of epitaxial graphene, which is graphene grown from the sublimation of silicon from silicon carbide, and forming heterostructures with legacy functional materials, such as transition metal oxides and selective capture probes like antibodies and aptamers to develop rapid, ultrasensitive, and selective sensors to address critical environmental and public health challenges. Epitaxial graphene provides a single-crystal, lithography-compatible graphene substrate that retains the desirable electronic properties of graphene without the drawbacks associated with transferred materials. This work focuses on creating heterostructures using traditional functional materials, such as manganese dioxide and antibodies, to develop high-quality, selective sensors for both biological and environmental applications. The practical applications of these sensors are demonstrated and validated using techniques such as Raman spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, scanning electron microscopy, and electrical characterization. Additionally, detailed material analysis on producing these heterostructures is provided, emphasizing their ability to be modified without damaging the underlying graphene surface. This highlights epitaxial graphene's robust and versatile nature and its potential for creating high-quality devices with relatively simple designs. Finally, these biosensors are applied to alternate antibody-antigen systems, including influenza, to enhance disease-tracking capabilities. We also explore advanced functional materials, such as protease-peptide systems, which enable the creation of on-chip chemistry systems previously unattainable with current material systems.Item NOVEL QUASI-FREESTANDING EPITAXIAL GRAPHENE ELECTRON SOURCE HETEROSTRUCTURES FOR X-RAY GENERATION(2024) Lewis, Daniel; Daniels, Kevin M; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Graphene, the 2D allotrope of carbon, boasts numerous exceptional qualities like strength, flexibility, and conductivity unmatched for its scale, and amongst its lesser-known capabilities is electron emission at temperatures and electric fields too low to allow for conventional thermionic or field emission sources to function. Driven by the mechanism of Phonon-Assisted Electron Emission (PAEE), planar microstructures fabricated from quasi-freestanding epitaxial graphene (QEG) on silicon carbide have exhibited emission currents of up to 8.5 μA at temperatures and applied fields as low as 200 C and 1 kV/cm, orders of magnitude below conventional electron source requirements.These emission properties can be influenced through variations in microstructure design morphology, and performance is controllable via device temperature and applied field in the same manner as thermionic or field emission sources. As 2D planar devices, graphene microstructure electron emitters can also be encapsulated with a thermally evaporated oxide, granting electrical isolation and environmental resistance, and can even exhibit emission current enhancement under these conditions. Graphene electron emitters expressed as heterostructure material stacks could see implementation as electron emission sources in environments or devices where conventional thermionic or field emission sources can’t be supported due to thermal, power system, or physical size limitations, the presence of contaminants, or even poor vacuum containment. An explorable application could see an oxide-encapsulated graphene electron source paired with a layered interaction-emission anode to create a micron-scale vertical alignment x-ray source with no need of vacuum containment. We investigate these properties with using hydrogen-intercalated quasi-freestanding bilayer epitaxial graphene, a rare and difficult to manufacture formulation that allows the graphene to behave as if it were a freestanding structure, while still benefiting from the macro-scale mechanical strength and fabrication process compatibility afforded by its silicon carbide substrate. The quasi-freestanding nature of the graphene limits substrate phonon interactions, allowing the graphene phonon-electron interactions to dominate, in turn empowering the PAEE mechanic. Our devices benefit from an ease of interaction that is untenable for processes not employing QEG, with the speed and simplicity of fabrication being a hallmark of our investigations. We begin our exploration of how the PAEE mechanism itself can be influenced in our designs, and how process and fabrication optimizations can be leveraged for device applications. Graphene’s role in the fields of microelectronics, condensed matter physics, and materials science is still novel, and rapidly expanding, and our investigations explore a unique facet of this wonder material’s capabilities.Item Understanding the effect of fabrication conditions on the structural, electrical, and mechanical properties of composite materials containing carbon fillers(2022) Morales, Madeline Antonia; Salamanca-Riba, Lourdes G; Material Science and Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Carbon structures are commonly used as the reinforcement phase in composite materials toimprove the electrical, mechanical, and/or thermal properties of the matrix material. The structural diversity of carbon in its various forms (graphene, carbon nanotubes, graphite fibers, for example) makes it a useful reinforcement phase, as the properties of the composite material can be tailored for a specific application depending on the structure and properties of the carbon structure used. In this work, the incorporation of graphene/graphitic carbon into an aluminum metal matrix by an electrocharging assisted process (EAP) was investigated to create a composite material with enhanced electrical conductivity and yield strength. The increased electrical conductivity makes the composite suitable for application in more efficient power transmission lines. The increased strength makes it useful as a lightweight structural material in aerospace applications. The EAP involves applying a direct current to a mixture of molten aluminum and activated carbon to induce the crystallization of graphitic sheets/ribbons that extend throughout the matrix. The effect of processing conditions (current density, in particular) on the graphitic carbon structure, electrical properties, and mechanical properties of the composite material was investigated. The effect of porosity/voids and oxide formation was discussed with respect to the measured properties, and updates to the EAP system were made to mitigate their detrimental effects. It was found that the application of current results in some increase in graphitic carbon crystallite size calculated from Raman spectra, but many areas show the same crystallite size as the activated carbon starting material. It is likely that the current density used during processing was too low to see significant crystallization of graphitic carbon. There was no increase in electrical conductivity compared to a baseline sample with no added carbon, most likely due to porosity/voids in the samples. The mechanical characterization results indicated that the graphitic carbon clusters formed by the process did not act as an effective reinforcement phase, with no improvement in hardness and a decrease in elastic modulus measured by nanoindentation. The decreased elastic modulus was a result of compliant carbon clusters and porosity in the covetic samples. The porosity/voids were not entirely eliminated by the updates to the system, thus the electrical conductivity still did not improve. Additionally, a multifunctional composite structure consisting of a carbon-fiber reinforced polymer (CFRP) laminate with added copper mesh layers was investigated for use in aerospace applications as a structural and electromagnetic interference (EMI) shielding component. The CFRP provides primarily a structural function, while the copper mesh layers were added to increase EMI shielding effectiveness (SE). Nanoindentation was used to study the interfacial mechanical properties of the fiber/polymer and Cu/polymer interfaces, as the interfacial strength dictates the overall mechanical performance of the composite. Further, a finite element model of EMI SE was made to predict SE in the radiofrequency to microwave range for different geometry and configurations of the multifunctional composite structure. The model was used to help determine the optimum design of the multifunctional composite structure for effective shielding of EM radiation. It was found from nanoindentation near the fiber/polymer and Cu/polymer interfaces that the carbon fibers act as an effective reinforcement phase with hardness in the matrix increasing in the interphase region near the carbon fibers due to strong interfacial adhesion. In contrast, the Cu/polymer interface did not exhibit an increase in hardness, indicating poor interfacial adhesion. The EMI SE model indicated that the combination of CFRP layers, which primarily shields EMI by absorption, and Cu mesh, which predominantly shields by reflection, provided adequate SE over a wider frequency range than the individual components alone. Further, it was found that the SE of the CFRP layers were improved by including multiple plies with different relative fiber orientations.Item Cyclotron resonance gain in the presence of collisions(2017) Cole, Nightvid; Antonsen, Thomas M; Ott, Edward; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The conditions needed for the amplication of radiation by an ensemble of magnetized, relativistic electrons that are collisionally slowing down are investigated. The current study is aimed at extending the work of other researchers in developing solid-state sources of Terahertz radiation. The source type considered here is based on gyrotron-like dynamics of graphene electrons, or it can alternately be viewed as a solid state laser source that uses Landau levels as its band structure and is thus similar to a quantum cascade laser. Such sources are appealing because they oer the potential for a compact, tunable source of Terahertz radiation that could have commercial applications in scanning, communication, or energy transfer. An exploration is undertaken, using linear and nonlinear theories, of the conditions under which such sources might be viable, assuming realistic parameters. Classical physics is used, and the model involves electrons in monolayer graphene assumed to be pumped by a laser, follow classical laws of motion with the dissipation represented by a damping force term, and lose energy to the electromagnetic eld as well. The graphene is assumed to be in a homogeneous magnetic eld, and is sandwiched between two partially-transmissive mirrors so that the device acts as an oscillator. This thesis incorporates the results of two approaches to the study of the problem. In the rst approach, a linear model is derived semi-analytically, which is relevant to the conditions under which there is gain in the device and thus stable operation is possible, versus the regime in which there is no net gain. In the second approach, a numerical simulation is employed to explore the nonlinear regime and saturation behavior of the oscillator. The simulation and the linear model both assume the same original equations of motion for the eld and particles that interact self-consistently. The model used here is very simplied, but the aim here is to elucidate the basic principles and scaling behavior of such devices, not necessarily to calculate what the exact dynamics, outputs, and parameters of a fully commercially realized device will be.Item IN-OPERANDO ELECTRON MICROSCOPY AND SPECTROSCOPY OF INTERFACES THROUGH GRAPHENE-BASED MEMBRANES(2017) Yulaev, Alexander; Leite, Marina S.; Kolmakov, Andrei; Material Science and Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Electron microscopy and spectroscopy (EMS) techniques enable (near-) surface and interfacial characterization of a variety of materials, providing insights into chemical/electrochemical and morphological information with nanoscale spatial resolution. However, the experimental realization of EMS in liquid/gaseous samples becomes problematic due to their incompatibility with high vacuum (HV) conditions. To perform EMS under elevated pressure conditions, electron transparent membranes made of thin C, SiO2 or/and Si3N4 are implemented to isolate a liquid/gas sample from HV environment. Nevertheless, even a few ten nanometer thick membrane deteriorates signal quality due to significant electron scattering. The other challenge of EMS consists in inaccessibility to probe solid state interfaces, e.g. solid-state Li-ion batteries, which makes their operando characterization problematic, limiting the analysis to ex situ and postmortem examination. The first part of my thesis focuses on developing an experimental platform for operando characterization of liquid interfaces through electron transparent membranes made of graphene (Gr)/graphene oxide (GO). The second part is dedicated to probing Li-ion transport at solid-state-battery surfaces and interfaces using ultrathin carbon anodes. I demonstrated the capability of GO to encapsulate samples with different chemical, physical, and biological properties and characterized them using EMS methods. I proposed and tested a new CVD-Gr transfer method using anthracene as a sacrificial layer. Characterization of transferred Gr revealed the advantages of our route with respect to a standard polymer based approach. A novel platform made of an array of Gr-capped liquid filled microcapsules was developed, allowing for a wide eld of view EMS. I showed the capability of conducting EMS analysis of liquid interfaces through Gr membranes using energy-dispersive X-ray spectroscopy, photoemission electron microscopy, and Auger electron spectroscopy. Using operando SEM and AES, I elucidated the role of oxidizing conditions and charging rate on Li plating morphology in all-solid-state Li-ion batteries with thin carbon anodes. Operando EMS characterization of Li-ion transport at battery interfaces with carbon or Gr anodes will provide valuable insights into safe all-solid-state Li-ion battery with enhanced performance.Item Optical and magnetic measurements of a levitated, gyroscopically stabilized graphene nanoplatelet(2017) Coppock, Joyce Elizabeth; Wellstood, Frederick; Kane, Bruce; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)I discuss the design and operation of a system for levitating a charged, $\mu$m-scale, multilayer graphene nanoplatelet in a quadrupole electric field trap in high vacuum. Levitation decouples the platelet from its environment and enables sensitive mechanical and magnetic measurements. First, I describe a method of generating and trapping the nanoplatelets. The platelets are generated via liquid exfoliation of graphite pellets and charged via electrospray ionization. Individual platelets are trapped at a pressure of several hundred mTorr and transferred to a trap in a second chamber, which is pumped to UHV pressures for further study. All measurements of the trapped platelet's motion are performed via optical scattering. Second, I present a method of gyroscopically stabilizing the levitated platelet. The rotation frequency of the platelet is locked to an applied radio frequency (rf) electric field $\bm{E}_{\mathrm{rf}}$. Over time, frequency-locking stabilizes the platelet so that its axis of rotation is normal to the platelet and perpendicular to $\bm{E}_{\mathrm{rf}}$. Finally, I present optical data on the interaction of a multilayer graphene platelet with an applied magnetic field. The stabilized nanoplatelet is extremely sensitive to external torques, and its low-frequency dynamics are determined by an applied magnetic field. Two mechanisms of interaction are observed: a diamagnetic polarizability and a magnetic moment proportional to the frequency of rotation. A model is constructed to describe this data, and experimental values are compared to theory.Item Plasmonic and Ultrafast Optical Response of 2D and 3D Dirac Materials(2016) Jadidi, Mohammad Mehdi; Murphy, Thomas E.; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The fast-evolving field of condensed matter physics is witnessing a rapid development of a new class of materials, called Dirac materials. The low-energy electronic excitation in these materials behaves like massless Dirac particles. These materials exhibit unique optoelectronic properties, and understanding of Dirac quasi-particle dynamics in two and three dimensions is imperative to realizing the potential applications. In this dissertation, we study two prominent Dirac materials that have unique optoelectronic properties: graphene (two-dimensional) and tantalum arsenide (three-dimensional). While the former can be regarded as the father of materials with a symmetry-protected Dirac spectrum, the latter is a more recent example of topology-protected Dirac materials, also known as 3D Weyl semimetals. We employ spectroscopy and ultrafast optical techniques to study plasmons, and the interaction/relaxation dynamics of photo-excited carriers in these materials. More specifically, we study a new class of plasmon resonances in hybrid metal-graphene structures, which is an important step towards practical graphene plasmonic optoelectronic devices. In addition, we investigate the giant nonlinear THz response of graphene plasmons using pump-probe techniques and discuss the physical origin of the plasmon-enhanced nonlinearity. Furthermore, we introduce a novel continuous-wave photomixing spectroscopy technique to investigate the frequency dependence and nonlinearity of hot-electron cooling in graphene. Finally, we explore the relaxation dynamics of photo-excited Weyl fermions in tantalum arsenide via ultrafast optical pump-probe techniques, which shed light on the electron-phonon relaxation processes in this material.Item Wetting of Graphene(2016) Andrews, Joseph E.; Das, Siddhartha; Chung, Peter W.; Mechanical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Graphene, a remarkable 2D material, has attracted immense attention for its unique physical properties that make it ideal for a myriad of applications from electronics to biology. Fundamental to many such applications is the interaction of graphene with water, necessitating an understanding of wetting of graphene. Here, molecular dynamics simulations have been employed to understand two fundamental issues of water drop wetting on graphene: (a) the dynamics of graphene wetting and (b) wetting of graphene nanostructures. The first problem unravels that the wetting dynamics of nanodrops on graphene are exactly the same as on standard, non-2D (or non-layered) solids – this is an extremely important finding given the significant difference in the wetting statics of graphene with respect to standard solids stemming from graphene’s wetting translucency effect. This same effect, as shown in the second problem, interplays with roughness introduced by nanostructures to trigger graphene superhydrophobicity following a hitherto unknown route.Item Nonlinear Optics and Carrier Dynamics in Nanostructured and Two-Dimensional Materials(2016) Suess, Ryan; Murphy, Thomas E; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Understanding and measuring the interaction of light with sub-wavelength structures and atomically thin materials is of critical importance for the development of next generation photonic devices. One approach to achieve the desired optical properties in a material is to manipulate its mesoscopic structure or its composition in order to affect the properties of the light-matter interaction. There has been tremendous recent interest in so called two-dimensional materials, consisting of only a single to a few layers of atoms arranged in a planar sheet. These materials have demonstrated great promise as a platform for studying unique phenomena arising from the low-dimensionality of the material and for developing new types of devices based on these effects. A thorough investigation of the optical and electronic properties of these new materials is essential to realizing their potential. In this work we present studies that explore the nonlinear optical properties and carrier dynamics in nanoporous silicon waveguides, two-dimensional graphite (graphene), and atomically thin black phosphorus. We first present an investigation of the nonlinear response of nanoporous silicon optical waveguides using a novel pump-probe method. A two-frequency heterodyne technique is developed in order to measure the pump-induced transient change in phase and intensity in a single measurement. The experimental data reveal a characteristic material response time and temporally resolved intensity and phase behavior matching a physical model dominated by free-carrier effects that are significantly stronger and faster than those observed in traditional silicon-based waveguides. These results shed light on the large optical nonlinearity observed in nanoporous silicon and demonstrate a new measurement technique for heterodyne pump-probe spectroscopy. Next we explore the optical properties of low-doped graphene in the terahertz spectral regime, where both intraband and interband effects play a significant role. Probing the graphene at intermediate photon energies enables the investigation of the nonlinear optical properties in the graphene as its electron system is heated by the intense pump pulse. By simultaneously measuring the reflected and transmitted terahertz light, a precise determination of the pump-induced change in absorption can be made. We observe that as the intensity of the terahertz radiation is increased, the optical properties of the graphene change from interband, semiconductor-like absorption, to a more metallic behavior with increased intraband processes. This transition reveals itself in our measurements as an increase in the terahertz transmission through the graphene at low fluence, followed by a decrease in transmission and the onset of a large, photo-induced reflection as fluence is increased. A hybrid optical-thermodynamic model successfully describes our observations and predicts this transition will persist across mid- and far-infrared frequencies. This study further demonstrates the important role that reflection plays since the absorption saturation intensity (an important figure of merit for graphene-based saturable absorbers) can be underestimated if only the transmitted light is considered. These findings are expected to contribute to the development of new optoelectronic devices designed to operate in the mid- and far-infrared frequency range. Lastly we discuss recent work with black phosphorus, a two-dimensional material that has recently attracted interest due to its high mobility and direct, configurable band gap (300 meV to 2eV), depending on the number of atomic layers comprising the sample. In this work we examine the pump-induced change in optical transmission of mechanically exfoliated black phosphorus flakes using a two-color optical pump-probe measurement. The time-resolved data reveal a fast pump-induced transparency accompanied by a slower absorption that we attribute to Pauli blocking and free-carrier absorption, respectively. Polarization studies show that these effects are also highly anisotropic - underscoring the importance of crystal orientation in the design of optical devices based on this material. We conclude our discussion of black phosphorus with a study that employs this material as the active element in a photoconductive detector capable of gigahertz class detection at room temperature for mid-infrared frequencies.Item Controlling Nanostructures for in-situ TEM Characterization(2015) Nilsson, Hanna Magdalena; Cumings, John; Material Science and Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Low dimensional nanostructures, such as nanotubes and 2D sheets, have unique and promising material properties both from a fundamental science and an application standpoint. Theoretical modelling and calculations predict previously unobserved phenomena that experimental scientists often struggle to reproduce because of the difficulty in controlling and characterizing the small structures under real-world constraints. The goal of this dissertation is to controlling these structures so that nanostructures can be characterized in-situ in transmission electron microscopes (TEM) allowing for direct observation of the actual physical responses of the materials to different stimuli. Of most interest to this work are the thermal and electrical properties of carbon nanotubes, boron nitride nanotubes, and graphene. The first topic of the dissertation is using surfactants for aqueous processing to fabricate, store, and deposit the nanostructures. More specifically, thorough characterization of a new surfactant, ammonium laurate (AL), is provided and shows that this new surfactant outperforms the standard surfactant for these materials, sodium dodecyl sulfate (SDS), in almost all tested metrics. New experimental set-ups have been developed by combining specialized in-situ TEM holders with innovative device fabrication. For example, electrical characterization of graphene was performed by using an STM-TEM holder and depositing graphene from aqueous solutions onto lithographically patterned, electron transparent silicon nitride membranes. These experiments produce exciting information about the interaction between graphene and metal probes and the substrate that it rests on. Then, by adding indium to the backside of the membrane and employing the electron thermal microscopy (EThM) technique, the same type of graphene samples could be characterized for thermal transport with high spatial resolution. It is found that reduced graphene oxide sheets deposited onto a silicon nitride membrane and displaying high levels of wrinkling have higher than expected electrical and thermal conduction properties. We are clearly able to visualize the ability of graphene to spread heat away from an electronic hot spot and into the substrate.