Electrical & Computer Engineering Research Works
Permanent URI for this collectionhttp://hdl.handle.net/1903/1658
Browse
4 results
Search Results
Item Energy Minimization of System Pipelines Using Multiple Voltages(IEEE, 1999-05) Qu, Gang; Kirovski, Darko; Potkonjak, Miodrag; Srivastava, Mani B.Modem computer and communication system design has to consider the timing constraints imposed by communication and system pipelines, and minimize the energy consumption. We adopt the recent proposed model for communication pipeline latency[23] and address the problem of how to minimize the power consumption in system-level pipelines under the latency constraints by selecting supply voltage for each pipeline stage using the variable voltage core-based system design methodology[l 11. We define the problem, solve it optimally under realistic assumptions and develop algorithms for power minimization of system pipeline designs based on our theoretical results. We apply this new approach on the 4- stage Myrinet GAM pipeline, with the appropriate voltage profiles, we achieve 93.4%, 91.3% and 26.9% power reduction on three pipeline stages over the traditional design.Item Synthesis Techniques for Low-Power Hard Real-Time Systems on Variable Voltage Processors(IEEE, 1998-12) Hong, Inki; Qu, Gang; Potkonjak, Miodrag; Srivastava, Mani B.The energy efficiency of systems-on-a-chip can be much improved if one were to vary the supply voltage dynamically at run time. In this paper we describe the synthesis of systems-on-a-chip based on core processors, while treating voltage (and correspondingly, the clock frequency) as a variable to be scheduled along with the computation tasks during the static scheduling step. In addition to describing the complete synthesis design flow for these variable voltage systems, we focus on the problem of doing the voltage scheduling while taking into account the inherent limitation on the rates at which the voltage and clock frequency can be changed by the power supply controllers and clock generators. Taking these limits on rate of change into account is crucial since changing the voltage by even a volt may take time equivalent to 100s to 10,000s of instructions on modern processors. We present both an exact but impractical formulation of this scheduling problem as a set of non-linear equations, as well as a heuristic approach based on reduction to an optimally solvable restricted ordered scheduling problem. Using various task mixes drawn from a set of nine real-life applications, our results show that we are able to reduce power consumption to within 7% of the lower bound obtained by imposing no limit at the rate of change of voltage and clock frequencies.Item Power Optimization of Variable-Voltage Core-Based Systems(IEEE, 1998-06) Hong, Inki; Kirovski, Darko; Qu, Gang; Potkonjak, Miodrag; Srivastava, Mani B.The growing class of portable systems, such as personal computing and communication devices, has resulted in a new set of system design requirements, mainly characterized by dominant importance of power minimization and design reuse. The energy efficiency of systems-on-a-chip (SOC) could be much improved if one were to vary the supply voltage dynamically at run time. We develop the design methodology for the lowpower core-based real-time SOC based on dynamically variable voltage hardware. The key challenge is to develop effective scheduling techniques that treat voltage as a variable to be determined, in addition to the conventional task scheduling and allocation. Our synthesis technique also addresses the selection of the processor core and the determination of the instruction and data cache size and configuration so as to fully exploit dynamically variable voltage hardware, which results in significantly lower power consumption for a set of target applications than existing techniques. The highlight of the proposed approach is the nonpreemptive scheduling heuristic, which results in solutions very close to optimal ones for many test cases. The effectiveness of the approach is demonstrated on a variety of modern industrial-strength multimedia and communication applications.Item Power Optimization of Variable Voltage Core-Based Systems(IEEE, 1999-12) Hong, Inki; Kirovski, Darko; Qu, Gang; Potkonjak, Miodrag; Srivastava, Mani B.The growing class of portable systems, such as personal computing and communication devices, has resulted in a new set of system design requirements, mainly characterized by dominant importance of power minimization and design reuse. The energy efficiency of systems-on-a-chip (SOC) could be much improved if one were to vary the supply voltage dynamically at run time. We develop the design methodology for the lowpower core-based real-time SOC based on dynamically variable voltage hardware. The key challenge is to develop effective scheduling techniques that treat voltage as a variable to be determined, in addition to the conventional task scheduling and allocation. Our synthesis technique also addresses the selection of the processor core and the determination of the instruction and data cache size and configuration so as to fully exploit dynamically variable voltage hardware, which results in significantly lower power consumption for a set of target applications than existing techniques. The highlight of the proposed approach is the nonpreemptive scheduling heuristic, which results in solutions very close to optimal ones for many test cases. The effectiveness of the approach is demonstrated on a variety of modern industrial strength multimedia and communication applications.