RADIATION SYNTHESIS OF IONIC LIQUID POLYMER ELECTROLYTE MEMBRANE FOR HIGH TEMPERATURE FUEL CELL APPLICATIONS

Simple item page
dc.contributor.advisorAl-Sheikhly, Mohamaden_US
dc.contributor.authorMecadon, Kevinen_US
dc.contributor.departmentMaterial Science and Engineeringen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.date.accessioned2020-07-13T05:31:52Z
dc.date.available2020-07-13T05:31:52Z
dc.date.issued2020en_US
dc.description.abstractThe purpose of this thesis was to design, synthesize and analyze innovative anhydrous fuel cell membranes that can operate at temperatures above 100°C. Operating at this higher temperature region improves performance and reliability of fuel cells: increasing proton mobility, enhancing reaction kinetics, increasing catalysis activity and reducing carbon monoxide poisoning. Traditional polymer electrolyte membrane fuel cells (PEMFCs) do not operate efficiently above 100°C because water is used as a proton conductive medium though the Grotthuss hopping mechanism. Through substituting water with protic ionic liquids and grafting onto fluorocarbon films, a new proton conductive network solid state PEM has been developed. These membranes can perform at high temperature above 100°C. Polymers were selected for grafting based on the following properties: high proton conductivity, low electrical conductivity, high mechanical properties, high chemical resistance, and high temperature and humidity stability. The method used to synthesize these anhydrous polymer electrolyte membranes (PEMs) was radiation grafting using heterocyclic protic ionic liquid monomers and fluorocarbon substrates. PEMs were prepared at the Medical Industrial Radiation Facilities (MIRF) at the National Institute of Standards and Technology (NIST). MIRF is a 10.5 MeV electron beam accelerator, which was used to radiate the fluorocarbon substrate and then indirectly graft heterocyclic protic ionic liquids to create PEMs. After synthesis, the extent and uniformity of PEM composition was analyzed using FTIR microscopy, SEM/EDS, SANS and their proton conductivity as measured by EIS. Through this research, indirect radiation grafting was shown to covalently bond ionic liquids onto fluorocarbon substrates to synthesize PEMs. The resulting ionic liquid PEMs showed proton conductivities greater than 10-3 S/cm above 100°C that behaved independent of humidity. The ionic liquid PEMs also demonstrated a positive correlation of increasing proton conductivity with increasing temperatures above 100°C even after the PEMs are dehydrated. The chemical properties and structure of the grafted ionic liquids greatly affects the proton conductive mechanisms present in the PEMs. These trends found through the course of this research will help the development of future anhydrous PEM with higher proton conductivity, performance, and reliability.en_US
dc.identifierhttps://doi.org/10.13016/yibp-hagg
dc.identifier.urihttp://hdl.handle.net/1903/26231
dc.language.isoenen_US
dc.subject.pqcontrolledPolymer chemistryen_US
dc.subject.pqcontrolledNuclear physics and radiationen_US
dc.subject.pqcontrolledEnergyen_US
dc.subject.pquncontrolledElectrochemical Impedance Spectroscopyen_US
dc.subject.pquncontrolledFuel Cellen_US
dc.subject.pquncontrolledIonic Liquiden_US
dc.subject.pquncontrolledPolymer Electrolyte Membraneen_US
dc.subject.pquncontrolledRadiation Chemistryen_US
dc.subject.pquncontrolledRadiation Graftingen_US
dc.titleRADIATION SYNTHESIS OF IONIC LIQUID POLYMER ELECTROLYTE MEMBRANE FOR HIGH TEMPERATURE FUEL CELL APPLICATIONSen_US
dc.typeDissertationen_US

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Mecadon_umd_0117E_20658.pdf
Size:
15.39 MB
Format:
Adobe Portable Document Format
Download

Collections

UMD Theses and Dissertations
Materials Science & Engineering Theses and Dissertations