PERFORMANCE ENHANCEMENT OF ELASTOCALORIC COOLING THROUGH SYSTEM OPTIMIZATION, NOVEL MATERIAL ARCHITECTURES, AND SCALABLE DESIGN
Files
Publication or External Link
External Link to Data Files
Date
Authors
Advisor
Yang, Bao
Citation
DRUM DOI
Abstract
Shape memory alloy (SMA) based elastocaloric cooling has matured substantially over the past decade, advancing from proof-of-concept demonstrations to lab-scale prototypes, while offering large latent heat, high Carnot efficiency, and zero global warming potential. Bridging the remaining gap toward practical deployment, this dissertation presents integrated research spanning numerical modeling, experimental validation, and system-level analysis to advance heat transfer optimization, material architecture, and scalable system design.In this study, heat transfer optimization is first addressed using the thermal utilization ratio (Z*), a novel non-dimensional parameter incorporating SMA thermophysical properties and interfacial heat transfer coefficient into a unified system metric. Using a validated dynamic model of a tubular NiTi system operating in active regeneration, an optimal Z* of 0.42 yields a maximum temperature lift of 27 K. Extended to alternative materials and geometries, slot and groove SMA configurations enhance temperature lift by 125% and 93% over the baseline, respectively, confirming Z* as a practical design guideline across diverse elastocaloric configurations. Building on this framework, strain maldistribution is identified as a fundamental performance-limiting mechanism and addressed through two complementary experimental approaches. First, a multi-stage, staggered-tube system with sequentially varying austenite finish temperatures (Af), fabricated through a heat treatment process, achieves a temperature lift of 38 K and a cooling power of 75 W, a 45% improvement over the single-Af baseline. Secondly, a gradient-Af NiTi regenerator with continuous transformation-temperature variation along the tube length yields a temperature lift of 16.5 K and cooling power of 44 W, also representing a 40% performance improvement. Together, these architectures achieve a minimum 66% reduction in strain maldistribution and extend the operational temperature range from 15–35°C to 0–70°C, accompanied by design guidelines for Af optimization across varying system scales and applications. Recognizing that tubular geometries impose fundamental constraints on heat transfer surface area and manufacturability, a stacked SMA sheet-based system is developed, leveraging the high specific surface area of sheet-form with stamping-based fabrication, eliminating costly wire-EDM methods. A modular design enables independent assembly and scaling of regenerator modules. A Single module system was optimized in two phases considering operational and design parameters using surrogate model. Optimization across single-, multi-, and hybrid configurations achieves 1 kW cooling power and a 10 K temperature lift. Contextualizing these advances, a comparative assessment of solid-state technologies further positions elastocaloric cooling in terms of performance, scalability, and commercialization readiness. Collectively, the frameworks, experimental validations, and system architectures presented advance the technology readiness of elastocaloric cooling, establishing a concrete pathway toward commercially viable, environmentally sustainable cooling systems to meet the growing global demand.