Oxygen Exchange Mechanisms on Solid Oxide Fuel Cell Cathodes in the Presence of Gas Phase Contaminants

Simple item page
dc.contributor.advisorWachsman, Eric Den_US
dc.contributor.authorPellegrinelli, Christopheren_US
dc.contributor.departmentMaterial Science and Engineeringen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.date.accessioned2017-01-25T06:35:13Z
dc.date.available2017-01-25T06:35:13Z
dc.date.issued2016en_US
dc.description.abstractPolarization losses associated with the oxygen reduction reaction (ORR) at the cathode and degradation of cathode materials remain as hurdles for high performance solid oxide fuel cells (SOFC). Rates of degradation depend significantly on the operating temperature and gas conditions, such as the presence of unwanted oxygen-containing compounds, namely H2O and CO2. In this study ORR fundamentals for the common cathode materials, La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) and (La0.8Sr0.2)0.95MnO3±δ (LSM), as well as their composites with Gd0.10Ce0.90O1.95 (GDC) and (Y2O3)0.08(ZrO2)0.92 (YSZ), respectively, are evaluated as a function of operating environment. A combination of electrochemical impedance spectroscopy (EIS) and gas phase oxygen isotope exchange is used to probe the kinetics of heterogeneous gas-solid reactions and electrode performance under a wide range of conditions. The results suggest that CO2 and H2O actively participate in the ORR and that the level of participation and governing mechanisms are dependent on the specific conditions. It was found that CO2 adsorbs readily on the surface of LSCF and leads to significant performance loss, while the affect of CO2 on LSM, an arguably similar material, is minimal. We propose that intrinsic material properties, such as vacancy concentration, will alter the contaminant interactions significantly, leading to specific contaminant-material relationships. The ORR on LSM is compared to that on LSM-YSZ composite, where the triple phase boundary (TPB), gas-electrode-electrolyte interface, plays a vital role. Further, the role of water in both the single phase, and composite materials is explored. A new in operando isotope exchange technique that couples electrochemical polarization with gas phase isotopic transient and steady state results is proposed, and initial results discussed. The development of in operando experiments is crucial to gain a full understanding of electrodes under real operating conditions, where chemical species are being driven by an electrochemical potential. The results contribute to the understanding of gas-solid reaction kinetics on ion conducting catalysts, and provide a basis for future experimental investigations.en_US
dc.identifierhttps://doi.org/10.13016/M2054W
dc.identifier.urihttp://hdl.handle.net/1903/19060
dc.language.isoenen_US
dc.subject.pqcontrolledMaterials Scienceen_US
dc.subject.pquncontrolledcathodeen_US
dc.subject.pquncontrolleddissociationen_US
dc.subject.pquncontrolledisotope exchangeen_US
dc.subject.pquncontrolledkineticsen_US
dc.subject.pquncontrolledORRen_US
dc.subject.pquncontrolledsolid oxide fuel cellen_US
dc.titleOxygen Exchange Mechanisms on Solid Oxide Fuel Cell Cathodes in the Presence of Gas Phase Contaminantsen_US
dc.typeDissertationen_US

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Pellegrinelli_umd_0117E_17651.pdf
Size:
10.95 MB
Format:
Adobe Portable Document Format
Download

Collections

UMD Theses and Dissertations
Materials Science & Engineering Theses and Dissertations