UMD Theses and Dissertations
Permanent URI for this collectionhttp://hdl.handle.net/1903/3
New submissions to the thesis/dissertation collections are added automatically as they are received from the Graduate School. Currently, the Graduate School deposits all theses and dissertations from a given semester after the official graduation date. This means that there may be up to a 4 month delay in the appearance of a given thesis/dissertation in DRUM.
More information is available at Theses and Dissertations at University of Maryland Libraries.
Browse
3 results
Search Results
Item Cyclotron resonance gain in the presence of collisions(2017) Cole, Nightvid; Antonsen, Thomas M; Ott, Edward; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The conditions needed for the amplication of radiation by an ensemble of magnetized, relativistic electrons that are collisionally slowing down are investigated. The current study is aimed at extending the work of other researchers in developing solid-state sources of Terahertz radiation. The source type considered here is based on gyrotron-like dynamics of graphene electrons, or it can alternately be viewed as a solid state laser source that uses Landau levels as its band structure and is thus similar to a quantum cascade laser. Such sources are appealing because they oer the potential for a compact, tunable source of Terahertz radiation that could have commercial applications in scanning, communication, or energy transfer. An exploration is undertaken, using linear and nonlinear theories, of the conditions under which such sources might be viable, assuming realistic parameters. Classical physics is used, and the model involves electrons in monolayer graphene assumed to be pumped by a laser, follow classical laws of motion with the dissipation represented by a damping force term, and lose energy to the electromagnetic eld as well. The graphene is assumed to be in a homogeneous magnetic eld, and is sandwiched between two partially-transmissive mirrors so that the device acts as an oscillator. This thesis incorporates the results of two approaches to the study of the problem. In the rst approach, a linear model is derived semi-analytically, which is relevant to the conditions under which there is gain in the device and thus stable operation is possible, versus the regime in which there is no net gain. In the second approach, a numerical simulation is employed to explore the nonlinear regime and saturation behavior of the oscillator. The simulation and the linear model both assume the same original equations of motion for the eld and particles that interact self-consistently. The model used here is very simplied, but the aim here is to elucidate the basic principles and scaling behavior of such devices, not necessarily to calculate what the exact dynamics, outputs, and parameters of a fully commercially realized device will be.Item THE DESIGN AND STUDY OF THE SUB-MILLIMETER WAVE LENGTH GYROTRON AND FUNDAMENTAL AND SECOND CYCLOTRON HARMONICS(2015) Pu, Ruifeng; Granatstein, Victor L.; Nusinovich, Gregory S.; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)This dissertation documents research activities directed toward designing high power, high efficiency gyrotrons to operate in the sub-millimeter wavelength region. The gyrotron is to produce pulsed RF power at 670 GHz, with possible application to a novel scheme for detecting concealed radioactive materials. High efficiency is to be achieved by designing a cavity resonator in which the electrons interact with the high-order TE31,8 mode. The choice of resonating mode helps to alleviate Ohmic losses in the cavity walls, and simulation results show that the output efficiency could be more than 30%. The design study takes into account a variety of known effects that could affect efficiency, such as orbital velocity spread, voltage depression and after-cavity interaction. The 670GHz gyrotron was built using the resonator design; operation confirmed that record high efficiency was achieved at an output power level of about 200 kilowatts. In addition, the issue of radial spread in electron guiding centers, which is related to the design of the magnetron injection gun used in the 670GHz gyrotron, was also examined. This spread degrades the interaction between the electrons and the RF field. This often overlooked issue is important for future electron gun designs; this thesis presents analytical methods for estimating how much the degradation affects gyrotron efficiency. The analytical method was verified with numerical simulation, showing that the efficiency's sensitivity to spread in guiding centers is highly dependent on the location of an annular electron beam: when the beam is injected in the inner peak of the desired mode, the radial spread should be kept to less than 1/3 of the RF wavelength. Finally, the dissertation investigates the possibility of further extending the operating parameters of the gyrotron by using the second harmonic of the electron cyclotron resonance. An average output power could be increased by operating the gyrotron continuously rather than in pulses. Using the second cyclotron harmonic allows the magnetic field requirement for resonance condition to be reduced by a factor of two, so that in 670 GHz gyrotrons the pulsed solenoid can be replaced with a cryo-magnet. The investigation shows that for the TE31,8 mode at the second cyclotron harmonic, the operating mode has only one competing mode at the fundamental cyclotron harmonic that could present a mode stability issue. Numerical simulation shows that this mode is TE11,6, the operating mode can suppress this mode, while achieving 20% interaction efficiency. Results also reveal that the resonator for the operating mode at second cyclotron harmonic must be modified to increase the Q-factor. Continuously operating gyrotrons using cryo-magnets have been used for plasma heating in controlled thermonuclear fusion research, albeit at lower frequency than the 670 GHz of the current study.Item LINEAR AND NONLINEAR ANALYSIS OF A GYRO-PENIOTRON OSCILLATOR AND STUDY OF START-UP SCENARIO IN A HIGH ORDER MODE GYROTRON(2006-01-31) Yeddulla, Muralidhar; Antonsen, Thomas; Nusinovich, Gregory; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The Cyclotron Resonant Maser (CRM) is a device in which electrons gyrating in an external magnetic field produce coherent EM radiation. A DC electron beam current must be converted to an AC beam current to create RF energy. There are two possible approaches: phase bunching (O-type) and spatial segregation (Mtype). In phase bunching, electrons are either accelerated or decelerated depending on when the electrons enter the interaction region, causing phase bunching. The electron bunches are then slowed down by the RF field for energy extraction. Not all electrons lose energy; some even gain energy. In spatial segregation, electrons entering the interaction region at different times are deflected in different directions. With an appropriate spatially varying RF field, all electrons can lose energy leading to very high conversion efficiency. A CRM with a smooth walled cylindrical waveguide interaction cavity and an annular electron beam passing through it can generate very large amount of RF energy. Depending on the electron beam position a gyrotron (O-type device) and a gyro-peniotron (M-type device) are possible. In this work, first, a nonlinear theory to study CRMs with a smooth walled cylindrical waveguide interaction cavity is presented. The nonlinear set of differential equations are linearized to study the starting conditions of the device. A gyropeniotron operating in the TE0,2 - mode is studied using the theory presented. It is found that a gyro-peniotron operating in a low order mode can be self excited without mode competition from gyrotron modes, leading to the possibility of a very efficient high power RF source. A higher order mode gyro-peniotron experiences severe mode competition from gyrotron modes. The cavity Q required for gyropeniotron operation is very high, which can lead to excessive heat in the cavity walls due to ohmic losses. Hence, a gyro-peniotron operation seems practical only in low order modes and in short pulses. Second, an existing linear theory of gyrotrons is extended to include effects of magnetic field tapering, cavity wall profile, finite beam thickness, velocity spread and axially dependent beam coupling to the fields of competing modes. Starting currents are calculated for the operating and the most dangerous competing mode in a 140 GHz gyrotron, which was developed at Communications and Power Industries (CPI). Start-up scenario of this device is also studied using the non-stationary code MAGY, which is a tool for modeling slow and fast microwave sources.