An Experimental Study of Static and Oscillating Rotor Blade Sections in Reverse Flow
| dc.contributor.advisor | Jones, Anya R | en_US |
| dc.contributor.author | Lind, Andrew Hume | en_US |
| dc.contributor.department | Aerospace Engineering | en_US |
| dc.contributor.publisher | Digital Repository at the University of Maryland | en_US |
| dc.contributor.publisher | University of Maryland (College Park, Md.) | en_US |
| dc.date.accessioned | 2016-02-09T06:33:53Z | |
| dc.date.available | 2016-02-09T06:33:53Z | |
| dc.date.issued | 2015 | en_US |
| dc.description.abstract | The rotorcraft community has a growing interest in the development of high-speed helicopters to replace outdated fleets. One barrier to the design of such helicopters is the lack of understanding of the aerodynamic behavior of retreating rotor blades in the reverse flow region. This work considers two fundamental models of this complex unsteady flow regime: static and oscillating (i.e., pitching) airfoils in reverse flow. Wind tunnel tests have been performed at the University of Maryland (UMD) and the United States Naval Academy (USNA). Four rotor blade sections are considered: two featuring a sharp geometric trailing edge (NACA 0012 and NACA 0024) and two featuring a blunt geometric trailing edge (ellipse and cambered ellipse). Static airfoil experiments were performed at angles of attack through 180 deg and Reynolds numbers up to one million, representative of the conditions found in the reverse flow region of a full-scale high-speed helicopter. Time-resolved velocity field measurements were used to identify three unsteady flow regimes: slender body vortex shedding, turbulent wake, and deep stall vortex shedding. Unsteady airloads were measured in these three regimes using unsteady pressure transducers. The magnitude of the unsteady airloads is high in the turbulent wake regime when the separated shear layer is close to the airfoil surface and in deep stall due to periodic vortex-induced flow. Oscillating airfoil experiments were performed on a NACA 0012 and cambered ellipse to investigate reverse flow dynamic stall characteristics by modeling cyclic pitching kinematics. The parameter space spanned three Reynolds numbers (165,000; 330,000; and 500,000), five reduced frequencies between 0.100 and 0.511, three mean pitch angles (5,10, and 15 deg), and two pitch amplitudes (5 deg and 10 deg). The sharp aerodynamic leading edge of the NACA 0012 airfoil forces flow separation resulting in deep dynamic stall. The number of associated vortex structures depends strongly on pitching kinematics. The cambered ellipse exhibits light reverse flow dynamic stall for a wide range of pitching kinematics. Deep dynamic stall over the cambered ellipse airfoil is observed for high mean pitch angles and pitch amplitudes. The detailed results and analysis in this work contributes to the development of a new generation of high-speed helicopters. | en_US |
| dc.identifier | https://doi.org/10.13016/M22M8H | |
| dc.identifier.uri | http://hdl.handle.net/1903/17361 | |
| dc.language.iso | en | en_US |
| dc.subject.pqcontrolled | Aerospace engineering | en_US |
| dc.subject.pqcontrolled | Engineering | en_US |
| dc.subject.pquncontrolled | Dynamic Stall | en_US |
| dc.subject.pquncontrolled | Experimental | en_US |
| dc.subject.pquncontrolled | Helicopters | en_US |
| dc.subject.pquncontrolled | Reverse Flow | en_US |
| dc.subject.pquncontrolled | Unsteady Aerodynamics | en_US |
| dc.title | An Experimental Study of Static and Oscillating Rotor Blade Sections in Reverse Flow | en_US |
| dc.type | Dissertation | en_US |
Files
Original bundle
1 - 1 of 1