Personal cooling system with phase change material

Simple item page
dc.contributor.advisorRadermacher, Reinharden_US
dc.contributor.authorQiao, Yiyuanen_US
dc.contributor.departmentMechanical Engineeringen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.date.accessioned2020-10-10T05:33:00Z
dc.date.available2020-10-10T05:33:00Z
dc.date.issued2020en_US
dc.description.abstractPersonal cooling systems (PCS) are attracting more attention recently since they can set back building thermostat setpoints to achieve energy savings and provide high-level human comfort by focusing on micro-environment conditions around occupants rather than the entire building space. Thus, a vapor compression cycle (VCC)-based PCS with a condenser integrated with the phase change material (PCM) is proposed. The PCM heat exchanger (PCMHX) works as a condenser to store waste heat from the refrigerant in the cooling cycle, in which the PCM melting process can affect the system performance significantly. Different from most previous study, various refrigerant heat transfer characteristics along the condenser flow path can result in the uneven PCM melting, leading to the degradation of the system performance. Therefore, enhancing heat transfer in the PCM, investigating the proposed PCS performance, improving PCMHX latent heat utilization in terms of the distribution of PCM melting, and developing a general-purpose PCM model are the objectives of this dissertation. Five PCMHX designs with different heat transfer enhancements including increasing heat-transfer area, embedding conductive structures, and using uniform refrigerant distribution among condenser branches are introduced first. Compared with non-enhanced PCM, the graphite-matrix-enhanced PCMHX performs the best with 5.5 times higher heat transfer coefficient and 49% increased coefficient of performance (COP). To investigate the proposed system performance, a system-level experimental parametric study regarding the thermostat setting, PCM recharge rates, and cooling time was conducted. Results show that the PCS can work properly with a stable cooling capacity of 160 W for 4.5 hours. A transient PCM-coupled system model was also developed for detailed system performance, PCM melting process and heat transfer analysis. From both experiment and simulation work, the uneven PCM melting was presented, which could result in an increase of condenser temperature and a degradation of system COP with time. Results show that one significant reason for the uneven PCM melting is the variation of the refrigerant temperature and heat transfer coefficient. Therefore, through experimental analysis, several solutions were proposed to minimize the negative effect of the uneven PCM melting. In addition, to extend the PCMHX application, a multi-tube PCMHX model was developed for general-purpose design. A new multi-tube heat transfer algorithm was proposed, and variable tube shape, connection, and topology for tubes and PCM blocks were considered. The comparison with other PCMHX models in the literature shows that the proposed model exhibits much higher flexibility and feasibility for comprehensive multi-tube configurations. The PCS coupled with PCMHX could achieve energy savings for a range of 8-36% depending on the climate and building types in the U.S.en_US
dc.identifierhttps://doi.org/10.13016/ifos-vfep
dc.identifier.urihttp://hdl.handle.net/1903/26588
dc.language.isoenen_US
dc.subject.pqcontrolledEnergyen_US
dc.subject.pqcontrolledThermodynamicsen_US
dc.subject.pqcontrolledEngineeringen_US
dc.subject.pquncontrolledDynamic Modelingen_US
dc.subject.pquncontrolledHVACen_US
dc.subject.pquncontrolledPCM Heat Exchangeren_US
dc.subject.pquncontrolledPersonal Coolingen_US
dc.subject.pquncontrolledPhase Change Materialen_US
dc.subject.pquncontrolledSubcoolingen_US
dc.titlePersonal cooling system with phase change materialen_US
dc.typeDissertationen_US

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Qiao_umd_0117E_21053.pdf
Size:
9.86 MB
Format:
Adobe Portable Document Format
Download

Collections

UMD Theses and Dissertations
Mechanical Engineering Theses and Dissertations