Shock Perturbations in Hypersonic Attached Shock-Wave/Turbulent-Boundary-Layer Interactions

dc.contributor.advisorLaurence, Stuart Jen_US
dc.contributor.authorDuemmel, Grant Williamen_US
dc.contributor.departmentAerospace Engineeringen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.date.accessioned2025-08-08T12:30:52Z
dc.date.issued2025en_US
dc.description.abstractAn experimental campaign was conducted in the University of Maryland, College Park’s High-Temperature Ludwieg Tube to examine turbulent shock-wave/boundary-layer interactions (SWBLI) on a conical compression-corner configuration at Mach 6.25. The SWBLI behavior was analyzed for multiple test conditions on five cone-flare configurations–a straight cone and four compression angles of 5◦, 10◦, 15◦, and 20◦–which all result in attached interactions at the junction. Unsteady oscillatory behavior along the shock was examined through high-speed schlieren imaging. Edge-detection techniques and correlation speed analysis were used to characterize the propagation speeds of turbulent structures and resulting flare-shock disturbances, frequency content along the shock, and interaction unsteadiness. Fluctuations observed along the shock were shown to remain relatively constant in amplitude as they propagate; a spatial frequency analysis showed that these were not favorable to any specific wavenumbers. As the compression angle increased, root mean square perturbation amplitudes decreased and the spatial wavenumber spectra dropped off more rapidly. The propagation speed of the shock disturbances was found to decrease as the compression angle of the flare increased, aligning more closely with the mean propagation speed of the flare boundary layer than that of the cone boundary layer. This suggests that the region downstream of the corner has influence on the shock behavior and that the shock could be receptive to disturbances in the region downstream of the corner. Additionally, the computed perturbation amplitudes were used along with the propagation speeds of disturbances to characterize how large upstream boundary-layer structures manifested in the compression shock region. Statistical analyses revealed modest increases in the mean, standard deviation, and root mean square shock perturbation amplitudes when large disturbances were present in the upstream boundary layer. The relative increase grew slightly with increasing compression angle and diminished slightly with increasing Reynolds number. The modest trends suggest that other features within the interaction had a more dominant effect on exciting the shock perturbations.en_US
dc.identifierhttps://doi.org/10.13016/cdte-p7fk
dc.identifier.urihttp://hdl.handle.net/1903/34359
dc.language.isoenen_US
dc.subject.pqcontrolledAerospace engineeringen_US
dc.subject.pquncontrolledShock-Wave/Boundary-Layer Interactionsen_US
dc.subject.pquncontrolledTurbulent SWBLIen_US
dc.titleShock Perturbations in Hypersonic Attached Shock-Wave/Turbulent-Boundary-Layer Interactionsen_US
dc.typeThesisen_US

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Duemmel_umd_0117N_25234.pdf
Size:
16.51 MB
Format:
Adobe Portable Document Format