Show simple item record

dc.contributor.advisorOhadi, Michaelen_US
dc.contributor.authorAl-Hajri, Ebrahim Saeed Abdullaen_US
dc.date.accessioned2010-02-19T06:39:02Z
dc.date.available2010-02-19T06:39:02Z
dc.date.issued2009en_US
dc.identifier.urihttp://hdl.handle.net/1903/9845
dc.description.abstractThis thesis presents a detailed study of parametric characterization of two-phase condensing flow of two selected refrigerants R134a and R-245fa in a single water-cooled micro-channel of 0.4 mm X 2.8 mm cross-section (0.7 mm hydraulic diameter and 7:1 aspect ratio) and 190 mm in length. To avoid flow mal-distribution associated with typical micro-channel tube banks, a single micro-channel was fabricated utilizing an innovative approach and used for the present study experiments. The study investigated the effects of variations in saturation temperature ranging from 30 oC to 70 oC, mass flux from 50 to 500 kg/m2s, and inlet super heat from 0 oC to 15 oC on the average heat transfer and overall pressure drop coefficient of the micro-channel condenser. In all cases the inlet vapor quality was kept at 100% quality (saturated vapor) and the outlet condition was always kept at 0% quality (saturated liquid). Accuracy of the fabricated channel geometry with careful design and choice of instrumentation of the test setup resulted in energy balance and average heat transfer coefficient uncertainties within +/-11% and +/-12%, respectively. It is observed that saturation temperature and mass flux have a significant effect on both heat transfer coefficient and overall pressure drop coefficient, where as the inlet super heat has little effect. This study provides further understanding of the potential micro-scale effects on the condensation phenomenon for the tube geometry and the dimensions investigated in the present study combined with flow visualization study. No previous study has addressed the unique single micro-channel geometry being investigated in the present work combined with the two-phase flow visualization of the flow regimes in the present micro-channel geometry. The letter was a major undertaking of the present work and represents one of the main contributions of the present work. The results of the present work shall prove useful in contributing to better understanding of any micro-scale effects on the condensation flow of the two selected refrigerants (one commonly used high pressure refrigerant, R134a) and the other a new low pressure refrigerant (R245fa). It is also expected that the results of this study will lead to future work in this area, realizing the fast penetration of the micro-channel technology in various compact/ultra compact heat exchangers, including refrigeration, petrochemical, electronics, transportation, and process industries.en_US
dc.titlePREDICTION OF HEAT TRANSFER AND PRESSURE DROP OF CONDENSING REFRIGERANT FLOW IN A HIGH ASPECT RATIO MICRO-CHANNELSen_US
dc.typeDissertationen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentMechanical Engineeringen_US
dc.subject.pqcontrolledEngineering, Mechanicalen_US
dc.subject.pquncontrolledCorrelationsen_US
dc.subject.pquncontrolledHeat transfer coefficienten_US
dc.subject.pquncontrolledHigh apect ratioen_US
dc.subject.pquncontrolledMicro-channelen_US
dc.subject.pquncontrolledPressure dropen_US
dc.subject.pquncontrolledVisualizationen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record