Show simple item record

Fabrication and Characterization of Polypyrrole/Gold Bilayer Microactuators for Bio-Mems Applications

dc.contributor.advisorSmela, Elisabethen_US
dc.contributor.authorLiu, Yingkaien_US
dc.date.accessioned2005-10-11T10:56:53Z
dc.date.available2005-10-11T10:56:53Z
dc.date.issued2005-08-25en_US
dc.identifier.urihttp://hdl.handle.net/1903/3008
dc.description.abstractThe proof of concept for conjugated polymer bilayer microactuators had been demonstrated prior to this dissertation with numerous devices, and their advantages in biomedical applications had been recognized. The next step for this technology was implementation in real systems, which required knowledge of the main performance metrics and limitations. In this dissertation, work focused on measuring these metrics for the first time to facilitate the development of cell-clinics, which are microsystems for cell study and for cell-based sensing. The conjugated polymer used throughout the dissertation was polypyrrole doped with dodecylbenzenesulfonate, PPy(DBS), and the second layer in the bilayer was gold. Device fabrication challenges were first identified and addressed, focusing particularly on methods to produce PPy/Au bilayers that did not suffer from delamination. By electroplating Au onto the electrodes or by wet etching them to increase mechanical interlocking, this problem, which had plagued the field for the last decade, was solved. Another important contributor to lifetime, which is a key actuator metric, is loss of electro-activity with extended cycling. This metric was quantified through measurements of the total exchanged charge of PPy(DBS) with cycles of electromechanical redox. This result impacts how these actuators can be used. Two other key metrics on which this work focused were bending angle, analogous to stroke in a linear actuator, and force. It was necessary to determine bending angle as a function of film thickness experimentally because the traditional bilayer beam models could not account for microfabricated bilayer radius of curvature data. Through experimental testing over a wide range of PPy and Au thicknesses, the relationship between PPy:Au thickness ratio and curvature was mapped out. The experimental results demonstrated the existence of strain gradients within the conjugated polymer films, with the material at the surface having greater actuation strain than that at the gold interface. Finally, accurate force measurements had not been done prior to this dissertation research because of the significant challenges involved in developing a method for measuring force in microactuators. This dissertation described the development of such a methodology and provides data for the blocked force as a function of polypyrrole thickness.en_US
dc.format.extent6964455 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoen_US
dc.titleFabrication and Characterization of Polypyrrole/Gold Bilayer Microactuators for Bio-Mems Applicationsen_US
dc.typeDissertationen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentMechanical Engineeringen_US
dc.subject.pqcontrolledEngineering, Mechanicalen_US
dc.subject.pquncontrolledMEMSen_US
dc.subject.pquncontrolledpolypyrroleen_US
dc.subject.pquncontrolledbilayeren_US
dc.subject.pquncontrolledmicroactuatoren_US
dc.subject.pquncontrolledbiomedicalen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record