Show simple item record

ELECTROCHEMISTRY OF PRECISION NANOSTRUCTURES FOR HIGH PERFORMANCE ENERGY STORAGE DEVICES

dc.contributor.advisorLee, Sang Boken_US
dc.contributor.authorKim, Namen_US
dc.date.accessioned2020-07-10T05:33:36Z
dc.date.available2020-07-10T05:33:36Z
dc.date.issued2020en_US
dc.identifierhttps://doi.org/10.13016/4rea-jpae
dc.identifier.urihttp://hdl.handle.net/1903/26192
dc.description.abstractWith the increase in the demand for high performing energy storage devices, the energy storage community has explored ways to improve Li-ion battery chemistry. Previous research has demonstrated that nanostructuring of Li-ion electrodes enables significant improvements in their power and energy densities. However, a systematic study is needed to quantify the impact of specific structural properties on the electrochemical behavior of the nanostructured electrode and to develop a guideline for high performance energy storage devices. In the first study of this dissertation, we investigate the impact of pore diameter, dynamic conductivity and interconnected structures on the electrochemistry of V2O5, cathode material for Li ion batteries. We determined that there were positive and negative effects of the interconnected structure depending on the material properties. When V2O5’s electronic conductivity increased with the degree of lithiation, a higher power density was measured with more interconnections. When the material’s electronic conductivity decreased with lithiation, a lower power density was measured with more interconnections. In the second study, we employ microfabrication techniques and atomic layer deposition to fabricate well defined nanochannels to study the effect of electrolyte nanoconfinement on the electrochemistry of anatase TiO2. Surprisingly, nanoconfinement resulted in high energy and power densities when compared to the bulk material. Simulations showed that the improvement in the electrode behavior was due to the negative surface charges of TiO2 which resulted high local concentration of Li ions within the nanochannel and minimal loss in the driving potential was observed at the stern layer. In the third study, we fabricate a platform for high performance 3D solid state batteries on a Si wafer to study the effect of high aspect ratio nanostructures on the electrochemical behavior of thin film solid state batteries. The V2O5 electrode in 3D scaffold showed 113 times higher capacity than the planar electrode at 2μA/cm2 and 1333 times higher capacity at 0.5mA/cm2. These studies can help to understand key structural parameters for improved Li-ion batteries, and the test platforms we developed in these studies can be applied to increase understanding of structural impacts on other ion battery chemistries as well.en_US
dc.language.isoenen_US
dc.titleELECTROCHEMISTRY OF PRECISION NANOSTRUCTURES FOR HIGH PERFORMANCE ENERGY STORAGE DEVICESen_US
dc.typeDissertationen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentChemistryen_US
dc.subject.pqcontrolledEnergyen_US
dc.subject.pqcontrolledMaterials Scienceen_US
dc.subject.pquncontrolledBattery Architectureen_US
dc.subject.pquncontrolledEnergy Storageen_US
dc.subject.pquncontrolledLithium ion batteryen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record