Show simple item record

Development of High Temperature (3,400°F) and High Pressure (27,000 psi) Gas Venting Process for Nitrogen Batch Heater

dc.contributor.advisorGupta, Ashwani K.en_US
dc.contributor.authorKathrotiya, Parthen_US
dc.date.accessioned2017-06-22T06:05:29Z
dc.date.available2017-06-22T06:05:29Z
dc.date.issued2017en_US
dc.identifierhttps://doi.org/10.13016/M2B28G
dc.identifier.urihttp://hdl.handle.net/1903/19404
dc.description.abstractThis thesis discusses a venting process for nitrogen gas heated up to 3,400°F and 27,000 psi. Nitrogen at similar temperatures and pressures have successfully been vented in hot isostatic pressing (HIP) manufacturing processes, but to date no further applications are known for Heater Vessels used in hypersonic wind tunnels. The thesis first focuses on the instrumentation and experimental setup to test venting nitrogen gas up to 1550°F and 22,000 psi and to measure thermal stratification in the Heater Vessel. The results of the experiment show the current Heater Vessel is capable of venting nitrogen gas up to 1550°F and 22,000 psi by instrumenting critical locations and leveraging passive cooling. The thesis then focuses on using data from the experiment to design a system that is capable of venting nitrogen gas heated up to 3,400°F and 27,000 psi through the bottom closure of the Heater Vessel.en_US
dc.language.isoenen_US
dc.titleDevelopment of High Temperature (3,400°F) and High Pressure (27,000 psi) Gas Venting Process for Nitrogen Batch Heateren_US
dc.typeThesisen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentMechanical Engineeringen_US
dc.subject.pqcontrolledMechanical engineeringen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record