Show simple item record

dc.contributor.advisorStoliarov, Stanislav I.en_US
dc.contributor.authorLi, Jingen_US
dc.date.accessioned2014-10-16T05:36:31Z
dc.date.available2014-10-16T05:36:31Z
dc.date.issued2014en_US
dc.identifierhttps://doi.org/10.13016/M2XP4F
dc.identifier.urihttp://hdl.handle.net/1903/15897
dc.description.abstractA quantitative understanding of the processes that occur in the condensed phase of burning materials is critical for the prediction of ignition and growth of fires. A number of models have been developed to simulate these condensed phase processes. The main issue that remains to be resolved is the determination of parameters to be input into these models, which are formulated in terms of fundamental physical and chemical properties. This work is focused on developing and applying a systematic methodology for the characterization of polymeric materials based on milligram-scale and bench-scale tests to isolate specific chemical and/or physical processes in each scale level. The entire study is divided into two parts corresponding to two different scale tests and analysis. The first part is concentrated on the measurement of kinetics and thermodynamics of the thermal degradation of polymeric materials at milligram-scale. It employs a simultaneous thermal analysis instrument capable of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). A numerical model is utilized to fit TGA data and obtain thermal degradation kinetics to a continuum pyrolysis model. This model is subsequently employed to analyze DSC heat flow and extract sensible, melting and degradation reaction heats. The extracted set of kinetic and thermodynamic parameters is shown to simultaneously reproduce TGA and DSC curves for a set of 15 widely used commercial polymers. Then the first part of this study was extended to bench-scale gasification experiments that were carried out in a controlled atmosphere pyrolysis apparatus (CAPA) which has been recently developed in our group. The CAPA is used to measure material gravimetric and thermal changes during thermal decomposition in an anaerobic atmosphere with a capability of analyzing material thermal transport properties. These properties, combined with material kinetics and thermodynamics from the first part of this study, were used as inputs for a pyrolysis model to simulate one-dimensional polymer gasification under wide range of external heat fluxes. The predictive power of this model and validity of its parameters are verified against the results of gasification experiments. 7 out of 15 polymers were validated in bench-scale and the parameterized simulations are in reasonable agreement with experimental data under wide range of conditions.en_US
dc.language.isoenen_US
dc.titleA MULTISCALE APPROACH TO PARAMETERIZATION OF BURNING MODELS FOR POLYMERIC MATERIALS.en_US
dc.typeDissertationen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentMechanical Engineeringen_US
dc.subject.pqcontrolledMechanical engineeringen_US
dc.subject.pqcontrolledMaterials Scienceen_US
dc.subject.pqcontrolledPlasticsen_US
dc.subject.pquncontrolledDifferential scanning calorimetryen_US
dc.subject.pquncontrolledPolymer flammabilityen_US
dc.subject.pquncontrolledPyrolysis modelingen_US
dc.subject.pquncontrolledThermal conductivityen_US
dc.subject.pquncontrolledThermogravimetric analysisen_US
dc.subject.pquncontrolledThermophysical propertiesen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record