Show simple item record

dc.contributor.advisorAntonsen, Thomas Men_US
dc.contributor.authorLarsen, Paul Benjaminen_US
dc.date.accessioned2011-10-08T06:04:10Z
dc.date.available2011-10-08T06:04:10Z
dc.date.issued2011en_US
dc.identifier.urihttp://hdl.handle.net/1903/11972
dc.description.abstractThis thesis develops a qualified design for a sheet-beam coupled-cavity slow-wave structure for use in a high-power millimeter wave traveling wave tube amplifier. The main advance realized in the design is the roughly ten-fold increase in power gained by utilizing a sheet, rather than cylindrical, beam while at the same time employing mode-suppression techniques to suppress competing modes that are introduced by the sheet geometry. This design addresses considerations relevant to high-power tubes in general, as well as points specific to the design of a sheet-beam structure. The coupled-cavity structure is designed with the following general characteristics: center frequency of 35 GHz with greater than a 10% bandwidth, and capabilities of 5 kW pulsed output power. The device operating parameters are as follows: a moderate gain of 18 dB, and an experimentally demonstrated sheet electron beam with 3.5 A, 19.5 kV, and 0.3 mm x 4.0 mm beam cross-section. The final design goal has been to limit the interaction length as much as possible to reduce magnet weight and complications. A final design structure is proposed, which produces in excess of 5 kW peak power in simulation with safeguards from instabilities. The structure geometry is based on a novel design for a sheet-beam coupled-cavity slow-wave structure that has been characterized through various analyses, simulations, and experiments. This thesis outlines and details the various techniques used to probe the structure and thus form a full characterization of the structure and proposed amplifier device. The concept espoused by much of this work is to adapt the analyses from cylindrical beam devices for the sheet-beam geometry. Then we make comparisons between the new sheet-beam structure and conventional devices. From these comparisons we draw conclusions on the operation of sheet-beam amplifiers and make design choices accordingly. The final design is validated with fully three-dimensional particle simulations and predicts stable amplification across the range of operation.en_US
dc.titleDesign of an Overmoded Ka-Band Sheet-Beam Coupled-Cavity Traveling-Wave Tube Amplifieren_US
dc.typeDissertationen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentElectrical Engineeringen_US
dc.subject.pqcontrolledElectrical engineeringen_US
dc.subject.pquncontrolledcoupled-cavityen_US
dc.subject.pquncontrolledhigh-poweren_US
dc.subject.pquncontrolledinstabilitiesen_US
dc.subject.pquncontrolledmicrowave amplifieren_US
dc.subject.pquncontrolledsheet-beamen_US
dc.subject.pquncontrolledtraveling-wave tubeen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record