Show simple item record

Oxygen Measurement During Cell Culture: From Multiwell Plates to Microfluidic Devices

dc.contributor.advisorForry, Samuel Pen_US
dc.contributor.advisorRaghavan, Srinivasa Ren_US
dc.contributor.authorThomas, Peter Chungen_US
dc.date.accessioned2011-07-06T05:57:36Z
dc.date.available2011-07-06T05:57:36Z
dc.date.issued2011en_US
dc.identifier.urihttp://hdl.handle.net/1903/11551
dc.description.abstractOxygen is an important regulator of normal cell behavior. Proper supply of oxygen is required to maintain ATP production, while perturbation of oxygen supply alters cell behavior and leads to tissue damage and cell death. <italic>In vivo</italic>, cells are exposed to a mean partial pressure of oxygen between 0.03 to 0.09 atm that is tissue specific. In contrast, conventional cell cultures are routinely performed at an atmospheric oxygen level of 0.21 atm. The disparity between <italic>in vivo </italic>and <italic>in vitro </italic>oxygen levels have been shown to affect cell viability, growth and differentiation. Continuous measurements and control of oxygen levels are thus critical to maintaining proper cell behavior. Current methods of oxygen measurement are invasive, difficult to integrate with microscopy and lack imaging capabilities. To improve the current state of measurements, we have developed a new non-invasive oxygen sensor for <italic>in vitro </italic>cell culture. The sensor was prepared by incorporating a porphyrin dye, Pt(II) meso-Tetra(pentafluoro-phenyl)porphine (PtTFPP), into gas permeable poly(dimethylsiloxane) (PDMS) thin films. The response of the sensor to oxygen followed the linear Stern-Volmer equation and demonstrated an order of magnitude higher sensitivity compared to other sensors (<italic>K</italic><sub>SV</sub> = 548 &plusmn; 71 atm<super>-1</super>). A multilayer design created by sandwiching the PtTFPP-PDMS with a thin film of Teflon AF followed by a second layer of PDMS effectively mitigated against cytotoxicity effects and provided a suitable substrate for cell attachment. To demonstrate the utility of the sensor, oxygen measurements were made continuously with NIH 3T3 mouse fibroblast cells. The oxygen levels were found to decrease as a result of oxygen consumption by the cells. Using Fick's law, the data was analyzed and a per-cell oxygen consumption rate for the 3T3 fibroblasts was calculated. In addition, cells were clearly visualized on the sensor demonstrating the ability to integrate with phase-contrast and fluorescence microscopy. Next, human hepatocellular carcinoma HepG2 were cultured on the oxygen sensor and continuous oxygen measurements showed a drastic decrease in oxygen level such that the cells were exposed to hypoxic conditions within 24 h. The per-cell oxygen consumption rate for HepG2 was determined to be 30 times higher than the 3T3 fibroblasts, confirming the high metabolic nature of these cells. At high densities, oxygen flux measurements showed an asymptotic behavior reaching the theoretical maximum of the culture condition. When the oxygen diffusion barrier was reduced, the oxygen flux increased, demonstrating insufficient oxygenation for HepG2 at these densities. In routine culture, HepG2 adhere to their neighboring cells which results in formation of cell clusters. Oxygen measurement confirmed the presence of oxygen gradient across the cell clusters with the lowest oxygen levels observed in the middle. Finally, we successfully integrated the oxygen sensor into microfluidic systems. The sensor provided real-time non-invasive measurements of oxygen levels on-chip. To regulate the oxygen levels in the device, water with different dissolved oxygen concentrations was used instead of gas. This method successfully mitigated the problems of pervaporation associated with previous devices. Physiologically relevant oxygen levels and oxygen gradients were easily generated on the device and the results showed excellent agreement with numerical simulations.en_US
dc.titleOxygen Measurement During Cell Culture: From Multiwell Plates to Microfluidic Devicesen_US
dc.typeDissertationen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentBioengineeringen_US
dc.subject.pqcontrolledEngineeringen_US
dc.subject.pqcontrolledBiomedical Engineeringen_US
dc.subject.pquncontrolledmammalian cell cultureen_US
dc.subject.pquncontrolledmicrofluidicsen_US
dc.subject.pquncontrolledoxygenen_US
dc.subject.pquncontrolledoxygen consumptionen_US
dc.subject.pquncontrolledsensoren_US
dc.subject.pquncontrolledstern-volmeren_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record