Show simple item record

dc.contributor.advisorAdomaitis, Raymond Aen_US
dc.contributor.authorDwivedi, Vivek Harien_US
dc.date.accessioned2010-07-02T05:59:30Z
dc.date.available2010-07-02T05:59:30Z
dc.date.issued2010en_US
dc.identifier.urihttp://hdl.handle.net/1903/10354
dc.description.abstractAtomic layer deposition (ALD) is a deposition technique suitable for the con- trolled growth of thin films. During ALD, precursor gasses are supplied to the reactor in an alternating sequence producing individual atomic layers through self- limiting reactions. Thin films are grown conformally with atomic layer control over surfaces with topographical features. A very promising material system for ALD growth is aluminum oxide. Alu- minum oxide is highly desirable for both its physical and electronic characteristics. Aluminum oxide has a very high band gap (~ 9 ev) and a high dielectric constant (k ~ 9). The choice of precursors for aluminum oxide atomic layer deposition vary from aluminum halide, alkyl, and alkoxides for aluminum-containing molecules; for oxygen-containing molecules choices include oxygen, water, hydrogen peroxide and ozone. For this work a multiscale simulation is presented where aluminum oxide is deposited inside anodic aluminum oxide (AAO) pores for the purposes of tuning the pore diameter. Controlling the pore diameter is an import step in the conversion of AAO into nanostructered catalytic membranes (NCM). Shrinking the pore size to a desired radius allows for the control of the residence time for molecules entering the pore and a method for molecular filtration. Furthermore pore diameter control would allow for the optimization of precursor doses making this a green process. Inherently, the ALD of AAO is characterized by a slow and a faster time scale where film growth is on the order of minutes and hours and surface reactions are near instantaneous. Likewise there are two length scales: film thickness and composition on the order of nanometers and pore length on the order of microns. The surface growth is modeled in terms of a lattice Monte Carlo simulation while the diffusion of the precursor gas along the length of the pore is modeled as a Knudsen diffusion based transport model.en_US
dc.titleA MULTISCALE MODEL FOR AN ATOMIC LAYER DEPOSITION PROCESSen_US
dc.typeDissertationen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentChemical Engineeringen_US
dc.subject.pqcontrolledEngineering, Chemicalen_US
dc.subject.pquncontrolledAnodic Aluminum Oxideen_US
dc.subject.pquncontrolledMonte Carloen_US
dc.subject.pquncontrolledMulti Scaleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record