Physics
Permanent URI for this communityhttp://hdl.handle.net/1903/2269
Browse
4 results
Search Results
Item TOPOLOGICAL PHOTONICS: NESTED FREQUENCY COMBS AND EDGE MODE TAPERING(2024) Flower, Christopher James; Hafezi, Mohammad; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Topological photonics has emerged in recent years as a powerful paradigm for the designof photonic devices with novel functionalities. These systems exhibit chiral or helical edge states that are confined to the boundary and are remarkably robust against certain defects and imperfections. While several applications of topological photonics have been demonstrated, such as robust optical delay lines, quantum optical interfaces, lasers, waveguides, and routers, these have largely been proof-of-principle demonstrations. In this dissertation, we present the design and generation of the first topological frequency comb. While on-chip generation of optical frequency combs using nonlinear ring resonators has led to numerous applications of combs in recent years, they have predominantly relied on the use of single-ring resonators. Here, we combine the fields of linear topological photonics and frequency microcombs and experimentally demonstrate the first frequency comb of a new class in an array of hundreds of ring resonators. Through high-resolution spectrum analysis and out-of- plane imaging we confirm the unique nested spectral structure of the comb, as well as the confinement of the parametrically generated light. Additionally, we present a theoretical study of a new kind of valley-Hall topological photonic crystal that utilizes a position dependent perturbation (or “mass-term”) to manipulate the width of the topological edge modes. We show that this approach, due to the inherent topological robustness of the system, can result in dramatic changes in mode width over short distances with minimal losses. Additionally, by using a topological edge mode as a waveguide mode, we decouple the number of supported modes from the waveguide width, circumventing challenges faced by more conventional waveguide tapers.Item SUPERCONDUCTING RADIO FREQUENCY MATERIALS SCIENCE THROUGH NEAR-FIELD MAGNETIC MICROSCOPY(2020) Oripov, Bakhrom Gafurovich; Anlage, Steven M; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Superconducing Radio-Frequency (SRF) cavities are the backbone of a new generation of particle accelerators used by the high energy physics community. Nowadays, the applications of SRF cavities have expanded far beyond the needs of basic science. The proposed usages include waste treatment, water disinfection, material strengthening, medical applications and even use as high-Q resonators in quantum computers. A practical SRF cavity needs to operate at extremely high rf fields while remaining in the low-loss superconducting state. State of the art Nb cavities can easily reach quality factors Q>2x10^10 at 1.3 GHz. Currently, the performance of the SRF cavities is limited by surface defects which lead to cavity breakdown at high accelerating gradients. Also, there are efforts to reduce the cost of manufacturing SRF cavities, and the cost of operation. This will require an R&D effort to go beyond bulk Nb cavities. Alternatives to bulk Nb are Nb-coated Copper and Nb3Sn cavities. When a new SRF surface treatment, coating technique, or surface optimization method is being tested, it is usually very costly and time consuming to fabricate a full cavity. A rapid rf characterization technique is needed to identify deleterious defects on Nb surfaces and to compare the surface response of materials fabricated by different surface treatments. In this thesis a local rf characterization technique that could fulfill this requirement is presented. First, a scanning magnetic microwave microscopy technique was used to study SRF grade Nb samples. Using this novel microscope the existence of surface weak-links was confirmed through their local nonlinear response. Time-Dependent Ginzburg-Landau (TDGL) simulations were used to reveal that vortex semiloops are created by the inhomogenious magnetic field of the magnetic probe, and contribute to the measured response. Also, a system was put in place to measure the surface resistance of SRF cavities at extremely low temperatures, down to T=70 mK, where the predictions for the surface resistance from various theoretical models diverge. SRF cavities require special treatment during the cooldown and measurement. This includes cooling the cavity down at a rate greater than 1K/minute, and very low ambient magnetic field B<50 nT. I present solutions to both of these challenges.Item Design of a nonlinear quasi-integrable lattice for resonance suppression at the University of Maryland Electron Ring(2018) Ruisard, Kiersten; Koeth, Timothy; Thomas, Antonsen; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Conventional particle accelerators use linear focusing forces for transverse confinement. As a consequence of linearity, accelerating rings are sensitive to myriad resonances and instabilities. At high beam intensity, uncontrolled resonance-driven losses can deteriorate beam quality and cause damage or radio-activation in beam line components and surrounding areas. This is currently a major limitation of achievable current densities in state-of-the-art accelerators. Incorporating nonlinear focusing forces into machine design should provide immunity to resonances through nonlinear detuning of particle orbits from driving terms. A theory of nonlinear integrable beam optics is currently being investigated for use in accelerator rings. Such a system has potential to overcome the limits on achievable beam intensity. This dissertation presents a plan for implementing a proof-of-principle quasi-integrable octupole lattice at the University of Maryland Electron Ring (UMER). UMER is an accelerator platform that supports the study of high-intensity beam dynamics. In this dissertation, two designs are presented that differ in both complexity and strength of predicted effects. A configuration with a single, relatively long octupole magnet is expected to be more stabilizing than an arrangement of many short, distributed octupoles. Preparation for this experiment required the development and characterization of a low-intensity regime previously not operated at UMER. Additionally, required tolerances for the control of first and second order beam moments in the proposed experiments have been determined on the basis of simulated beam dynamics. In order to achieve these tolerances, a new method for improved orbit correction is developed. Finally, a study of resonance-driven losses in the linear UMER lattice is discussed.Item HYDRODYNAMIC AND ELECTRODYNAMIC IMPLICATIONS OF OPTICAL FEMTOSECOND FILAMENTATION(2017) Jhajj, Nihal; Milchberg, Howard; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The propagation of a high peak power femtosecond laser pulse through a dielectric medium results in filamentation, a strongly nonlinear regime characterized by a narrow, high intensity core surrounded by a lower intensity energy “reservoir” region. The structure can propagate over many core diameter-based Rayleigh ranges. When a pulse of sufficiently high power propagates through a medium, the medium response creates an intensity dependent lens, and the pulse begins to focus in a runaway process known as optical collapse. Collapse is invariably mitigated by an arrest mechanism, which becomes relevant as the pulse becomes increasingly intense. In air, collapse is arrested through plasma refraction when the pulse becomes intense enough to ionize the medium. Following arrest, the pulse begins to “filament” or self-guide. In gaseous media, energy deposited in the wake of filamentation eventually thermalizes prompting a neutral gas hydrodynamic response. The gas responds to a sudden localized pressure spike by launching a single cycle acoustic wave, leaving behind a heated, low density channel which gradually dissipates through thermal diffusion. This dissertation presents a fundamental advance in the theory of optical collapse arrest, which is how a pulse transitions from the optical collapse regime to the filamentation regime. We provide experimental evidence, supported by theory and numerical simulation that pulses undergoing collapse arrest in air generate spatiotemporal optical vortices (STOVs), a new and previously unobserved type of optical vortex with phase and energy circulation in a spatiotemporal plane. We argue that STOV generation is universal to filamentation, applicable to all collapsing beams, independent of the initial conditions of the pulse or the details of the collapse arrest mechanism. Once formed, STOVs are essential for mediating intrapulse energy flows. We also study the hydrodynamic response following filamentation, with the intent of engineering the response to construct a variety of neutral gas waveguides. In a proof-of-concept experiment, we demonstrate that a transverse array of filamenting pulses can be used to inscribe two distinct types of waveguides into the air: acoustic and thermal waveguides. These waveguides can be used to guide very high average power laser beams or as remote atmospheric collection lenses.