UMD Theses and Dissertations
Permanent URI for this collectionhttp://hdl.handle.net/1903/3
New submissions to the thesis/dissertation collections are added automatically as they are received from the Graduate School. Currently, the Graduate School deposits all theses and dissertations from a given semester after the official graduation date. This means that there may be up to a 4 month delay in the appearance of a given thesis/dissertation in DRUM.
More information is available at Theses and Dissertations at University of Maryland Libraries.
Browse
3 results
Search Results
Item Direct Laser Writing-Enabled Microstructures with Tailored Reflectivity for Optical Coherence Tomography Phantoms(2023) Fitzgerald, Declan Morgan; Sochol, Ryan D; Mechanical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)As the continuous push to improve medical imaging techniques produces increasingly complex systems, so too must the phantoms critical to the accurate evaluation of these systems evolve. The inclusion of precise geometries is a well documented gap in optical coherence tomography (OCT) phantoms, a gap felt more severely as the technology improves. This thesis seeks to investigate the feasibility of utilizing new manufacturing techniques in the production of OCT phantoms with complex geometries while developing a phantom to determine the sensitivity of OCT systems. The new manufacturing methods include the replication of microstructures printed via direct laser writing into PMMA photoresist, the tailored smoothing of surface roughness inherent to direct laser writing, and the selective retention of surface roughness in certain regions. Each of these methods were implemented in the manufacture of an OCT sensitivity phantom and were found to be effective in each of their respective goals.The efficacy of the sensitivity phantom in evaluating the minimum reflectance still detectable by an OCT system shows promise. Effective reflectivity ranging from 0 to ~1 was accomplished within a single angled element and should provide a basis for determining the minimum reflectivity that results in a signal-to-noise ratio of 1. Further improvements must be made to the phantom footprint and manufacturing before the phantom’s reliability is certain.Item Additive Manufacturing of Microfluidic Technologies via In Situ Direct Laser Writing(2021) Alsharhan, Abdullah; Sochol, Ryan; Mechanical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Innovations in microfluidic technologies hold great promise for a wide range of chemical, biomedical, and soft robotic applications. Unfortunately, key drawbacks associated with soft lithography-based microfabrication processes hinder such progress. To address these challenges, we advance a novel submicron-scale additive manufacturing (AM) strategy, termed “in situ direct laser writing (isDLW)”. IsDLW is an approach that benefits from the architectural versatility and length scales inherent to two-photon polymerization (2PP), while simultaneously supporting the micro-to-macro interfaces required for its effective utilization in microfluidic applications. In this dissertation, we explore isDLW strategies that enable passive and active 3D microfluidic technologies capable of enhancing “on-chip” autonomy and sophistication. Initially, we use poly(dimethylsiloxane) (PDMS)-based isDLW to fabricate microfluidic diodes that enable unidirectional rectification of fluid flow. We introduce a novel cyclic olefin polymer (COP)-based isDLW strategy to address several limitations related to structural adhesion and compatibility of PDMS microchannels. We use this COP-based approach to print microfluidic transistors comprising flexible and free-floating components that enable both “normally open” (NO) and “normally closed” (NC) functionalities—i.e., source-to-drain fluid flow (QSD) through the transistor is either permitted (NC) or obstructed (NO) when a gate input (PG) is applied. As an exemplar, we employ COP-based isDLW to print an integrated microfluidic circuit (IMC) comprised of soft microgrippers downstream of NC microfluidic transistors with distinct PG thresholds. All of these microfluidic circuit elements are printed within microchannels ≤ 40 μm in height, representing the smallest such components (to our knowledge). Theoretical and experimental results illustrate on the operational efficacy of these components as well as characterize their performance at different input conditions, while IMC experimental results demonstrate sequential actuation of the microrobotic components to realize target gripper operations with a single PG input. Furthermore, to investigate the utility of this strategy for static microfluidic technologies, we fabricate: (i) interwoven bioinspired microvessels (inner diameters < 10 μm) capable of effective isolation of distinct microfluidic flow streams, and (ii) deterministic lateral displacement (DLD) microstructures that enable continuous sorting of submicron particles (860 nm). In combination, these results suggest that the developed AM strategies offer a promising pathway for advancing state-of-the-art microfluidic technologies for various biological and soft robotic applications.Item TOWARD PHANTOM DEVELOPMENT FOR MEDICAL IMAGING USING DIRECT LASER WRITING(2020) Lamont, Andrew Carl; Sochol, Ryan D.; Bioengineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)An important tool for the performance analysis and standardization of medical imaging technologies is the phantom, which offers specifically defined properties that mimic the structural and optical characteristics of a tissue of interest. The development of phantoms for high-resolution (i.e., micro-scale) three-dimensional (3D) imaging modalities can be challenging, however, as few manufacturing techniques can capture the architectural complexity of biological tissues at such scales. Direct Laser Writing (DLW) is an evolving additive manufacturing technique with nano-scale precision that can fabricate micro and nanostructures with unparalleled geometric complexity. This dissertation outlines the unique microfluidic-based DLW strategies that have been developed for novel micro-scale phantom production. First, I will outline the development and characterization of an in situ DLW strategy used to adhere printed components to the surfaces of a microchannel. I will then explain how we have leveraged this strategy for a proof-of-concept retinal cone outer segment phantom that is laden with light-scattering Titanium (IV) Dioxide nanoparticles. This phantom has valuable implications for the performance analysis of the emerging ophthalmological modality, adaptive optics-optical coherence tomography (AO-OCT). Next, I will describe the development and characterization of a microfluidic-based multi-material DLW strategy to fabricate single components from multiple materials with minimal registration error between the materials. Ultimately, we intend to use this method to develop multi-material platforms and phantoms, including high-aspect-ratio multi-material retinal cone phantoms for AO-OCT. Finally, to demonstrate the applicability of this method for applications beyond AO-OCT, I present a preliminary phantom production strategy for the light microscopy-based modality, whole slide imaging (WSI). Specifically, we assess the DLW and light microscopy performance of dyed photoresists and offer a preliminary multi-material demonstration, which are pivotal first steps toward the creation of a first-generation multi-material WSI phantom. This work provides valuable insights and strategies that leverage microfluidic-based DLW techniques to fabricate novel micro-scale phantoms. It is anticipated that these strategies will have a lasting impact, not only on the production of phantoms for medical imaging modalities, but also for the fabrication of advanced microfluidic and multi-material microstructures for fields such as meta-materials, micro-optics, lab-on-a-chip, and organ-on-a-chip.