Theses and Dissertations from UMD
Permanent URI for this communityhttp://hdl.handle.net/1903/2
New submissions to the thesis/dissertation collections are added automatically as they are received from the Graduate School. Currently, the Graduate School deposits all theses and dissertations from a given semester after the official graduation date. This means that there may be up to a 4 month delay in the appearance of a give thesis/dissertation in DRUM
More information is available at Theses and Dissertations at University of Maryland Libraries.
Browse
3 results
Search Results
Item INCREASING EFFICIENCY AND SUSTAINABILITY OF WASTE-TO-ENERGY SYSTEMS USING BIOCHAR FOR HYDROGEN SULFIDE CONTROL AND LIFE CYCLE ASSESSMENT(2019) Choudhury, Abhinav; Lansing, Stephanie; Environmental Science and Technology; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The research aim was to increase energy production efficiency and reduce the environmental impacts of waste-to-energy technologies, specifically anaerobic digestion (AD) of dairy manure (DM) and combustion of poultry litter (PL). The first objective was co-digestion of DM with gummy vitamin waste (GVW) to increase methane (CH4) yield. The GVW co-digestion treatments significantly increased CH4 yield by 126% - 151% compared to DM-only treatment and significantly decreased the H2S concentration in the biogas by 66% - 83% compared to DM-only. The second objective was understanding the effect of hydrogen sulfide (H2S) scrubber management, operation, and maintenance parameters on H2S removal efficiency. Even though the capital and operating costs for the two H2S scrubbing systems in this study were low (< $1500/year), they showed ineffective performance due to insufficient air injection, substitution of proprietary iron oxide-based H2S adsorbents for cheaper alternatives, and the lack of dedicated operators. The third objective was adsorption of H2S using Fe-impregnated biochar as a substitute for activated carbon (AC). Fe-impregnation of biochar led to a 4.3-fold increase in the H2S adsorption capacity compared to AC. When compared to unimpregnated biochars, Fe-impregnation led to an average 3.2-fold increase in the H2S adsorption capacity. The fourth objective was in-situ use of biochar in AD to remove H2S. In-situ biochar addition at the highest dose (1.82 g biochar/g manure total solids (TS)) resulted in an average H2S removal efficiency of 91.2%. Biochar particle size had no significant effect on H2S reduction. In-situ addition of Fe-impregnated biochar resulted in an average H2S removal efficiency of 98.5%. The fifth objective was a life cycle assessment (LCA) of a PL fluidized bed combustion (FBC) system. The LCA assessment showed that heating poultry houses using heat obtained from the combustion of PL in the FBC system had 32% lower climate change potential (CCP) compared to use of propane for heating poultry houses. However, analyzing the FBC system under a net positive electrical output scenario resulted in 66% less impact on CCP and a 48 – 98% reduction in environmental impacts compared to the previous scenario with net electricity input.Item ENERGY-POSITIVE METHODS OF WASTEWATER TREATMENT-- AN EXAMINATION OF ANAEROBIC DIGESTION & BIO-ELECTROCHEMICAL TECHNOLOGY(2013) Gregoire, Kyla Patricia; Tender, Leonard; Torrents, Alba; Civil Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The results presented here demonstrate plausibility of a hybrid Anaerobic Digester-Microbial Fuel Cell (AD-MFC) system for anaerobic primary (AD) and secondary (MFC) treatment and resource recovery from high-strength wastewater. We empirically determine the treatment efficiencies and energy densities achieved by the AD and MFC processes, both separately and when integrated as primary and secondary unit operations. On the basis of current production, undigested wastewater yielded an stable anodic current of 131 A/m3 when continuously fed to triplicate MFCs (chronoamperometry, Ean, -0.200V vs. Ag/AgCl). Substrate limitations in digested sludge reduced anodic current--36 A/m3, 17 A/m3, and 9 A/m3 were achieved from 6d, 13d, and 21d digestate, respectively. Cathodic limitations severely limited power/energy production by the MFC, with maximum power output of 11 W/m3 (69 mW/m2). Presumably, this was due to mass transport of oxygen reduction intermediates. When AD and MFC processes are de-coupled (i.e. each fed with undigested wastewater), the energy realized from AD (as biogas) was, on average, 29.6 kJ per m3 wastewater treated (8.2 Wh/m3), whereas the MFC produced, on average, 2.1 kJ per m3 wastewater treated (0.58 Wh/m3). On the basis of COD removal, AD separately generated 9,110 kJ per kg COD removed (2,530 Wh/kg COD) whereas MFC separately generated 0.18 kJ per kg COD removed (0.05 Wh/kg COD). When combined as primary and secondary unit processes with a 6-d digestion period (reaction period which yielded the highest net energy production), the energy output from AD (as biogas) was 23.9 kJ per m3 wastewater; the energy output from MFC (as electrical power) was 2.1 kJ per m3 wastewater. MFC treatment rates exceeded 90% COD removal, 80% VS removal and 80% TS removal, likely owing to the upflow, baffled reactor design that maximized interaction between wastewater and the anodic biofilm. Results indicate an inverse logarithmic relationship between digester retention time and subsequent MFC current production, i.e. maximal MFC current production is achieved with undigested waste, and an inverse linear relationship between digester retention time and subsequent COD/VS removal in MFCs. Breakthroughs must be made to address cathodic limitations of MFCs, before scaling is practically or economically viable.Item DESIGN AND ECONOMICS OF PLUG-FLOW, SMALL-SCALE ANAEROBIC DIGESTERS FOR TEMPERATE CLIMATES(2011) Klavon, Katherine Heléne; Lansing, Stephanie; Environmental Science and Technology; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Anaerobic digestion is a manure treatment option that is gaining popularity throughout the world as a result of its multiple environmental and economic benefits. There exists a need for further research to make anaerobic digestion and methane recovery more readily available, cost effective, and manageable to small dairy facilities in the United States. This research analyzes the design and economics of plug flow digesters, modeled after low-cost digesters utilized in the developing world and modified to operate on small to medium-scale farms located in the temperate United States. The objectives of this research are to: 1) Describe the modified design and construction of the research plug flow digesters and analyze the barriers and design challenges to implementing this technology in the United States and 2) Conduct an economic analysis to determine the feasibility of installation and operation of these types of systems in the temperate United States.