REGULATED TRANSFORMER RECTIFIER UNIT FOR MORE ELECTRIC AIRCRAFTS

dc.contributor.advisorKhaligh, Alirezaen_US
dc.contributor.authorMALLIK, AYANen_US
dc.contributor.departmentElectrical Engineeringen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.date.accessioned2019-06-19T05:31:03Z
dc.date.available2019-06-19T05:31:03Z
dc.date.issued2018en_US
dc.description.abstractThe impending trends in the global demand of more-electric-aircrafts with higher efficiency, high power density, and high degree of compactness has opened up numerous opportunities in front of avionic industries to develop innovative power electronic interfaces. Traditionally, passive diode-bridge based transformer rectifier units (TRU) have been used to generate a DC voltage supply from variable frequency and variable voltage AC power out of the turbo generators. These topologies suffer from bulky and heavy low-frequency transformer size, lack of DC-link voltage regulation flexibility, high degree of harmonic contents in the input currents, and additional cooling arrangement requirements. This PhD research proposes an alternative approach to replace TRUs by actively controlled Regulated Transformer Rectifier Units (RTRUs) employing the advantages of emerging wide band gap (WBG) semiconductor technology. The proposed RTRU utilizing Silicon Carbide (SiC) power devices is composed of a three-phase active boost power factor correction (PFC) rectifier followed by an isolated phase-shifted full bridge (PSFB) DC-DC converter. Various innovative control algorithms for wide-range input frequency operation, ultra-compact EMI filter design methodology, DC link capacitor reduction approach and novel start-up schemes are proposed in order to improve power quality and transient dynamics and to enhance power density of the integrated converter system. Furthermore, a variable switching frequency control algorithm of PSFB DC-DC converter has been proposed for tracking maximum conversion efficiency at all feasible operating conditions. In addition, an innovative methodology engaging multi-objective optimization for designing electromagnetic interference (EMI) filter stage with minimized volume subjected to the reactive power constraints is analyzed and validated experimentally. For proof-of-concept verifications, three different conversion stages i.e. EMI filter, three-phase boost PFC and PSFB converter are individually developed and tested with upto 6kW (continuous) / 10kW (peak) power rating, which can interface a variable input voltage (190V-240V AC RMS) variable frequency (360Hz – 800Hz) three-phase AC excitation source, emulating the airplane turbo generator and provide an AC RMS voltage of 190V to 260V. According to the experimental measurements, total harmonic distortion (THD) as low as 4.3% and an output voltage ripple of ±1% are achieved at rated output power. The proposed SiC based RTRU prototype is ~8% more efficient and ~50% lighter than state-of-the art TRU technologies.en_US
dc.identifierhttps://doi.org/10.13016/b6bh-wiwm
dc.identifier.urihttp://hdl.handle.net/1903/21867
dc.language.isoenen_US
dc.subject.pqcontrolledElectrical engineeringen_US
dc.subject.pqcontrolledEnergyen_US
dc.subject.pquncontrolledMore Electric Aircraften_US
dc.subject.pquncontrolledPower Electronicsen_US
dc.subject.pquncontrolledPower Supplyen_US
dc.subject.pquncontrolledRegulated Transformer Rectifier Uniten_US
dc.titleREGULATED TRANSFORMER RECTIFIER UNIT FOR MORE ELECTRIC AIRCRAFTSen_US
dc.typeDissertationen_US

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
MALLIK_umd_0117E_19658.pdf
Size:
5.9 MB
Format:
Adobe Portable Document Format