Yuan, ChenPolycyclic aromatic hydrocarbons (PAHs) and Polychlorinated biphenyls (PCBs) are two groups of persistent organic pollutants (POPs) with toxicity, carcinogenicity, and teratogenicity. Those compounds are harmful to human health and wildlife. Stormwater is one of the important sources of PAHs and PCBs to aquatic environments. Stormwater control measures (SCMs) have already been used to remove PAHs and PCBs from stormwater, however traditional SCMs can remove PAHs and PCBs in the particle phase, but there still are dissolved PAHs and PCBs in the outflow of SCMs. This study focused on reducing the influence of PAHs and PCBs in stormwater on the environment by 1) improve the treatment performance by adding a polishing treatment procedure after traditional SCMs, and remove the PAHs and PCBs accumulated in the polishing treatment media by bioaugmentation of Pseudomonas putida ATCC 17484 and Paraburkholderia xenovorans LB400 and 2) dechlorination of PCBs in the sediment of aquatic environments by biofilm Dehalobium chlorocoercia DF1 inoculum. The results of polishing treatment showed that all black carbon materials, namely biochar, granular activated carbon (GAC), and regenerated GAC (RAC), were effective to remove dissolved PAHs with removal > 95%. However, all materials had lower removal efficiency on PCBs with removal > 84%, By the comparation of cost and lifetime under the condition that 50% polishing media are used in the polishing treatment facility. RAC which has a lifetime>147 years based on the precipitation of Maryland and Washington and cost <3.79 $-m3-yr-1, was the best material for polishing treatment. Results of treatment train with a traditional SCM media column and polishing treatment column indicated that average removal of PAHs can be improved from 94.56% of BSM columns to 99.61% of polishing treatment columns, and removal of PCBs can be improved from 84.61% to 95.16%. Results of bioaugmentation of polishing treatment media showed no biodegradation took place in the mesocosms with polishing media. However, the liquid mesocosms showed P.putida degraded 97.9% of pyrene. The bacteria colony on plates after the biodegradation experiment showed that there were less P.putida and P.xenovorans colony of polishing media mesocosms than liquid mesocosms. Therefore, the limitation of biodegradation of polishing media mesocosms may cause by the limited bioavailability and less active inoculated bacteria. The results of dechlorination by Dehalobium chlorocoercia DF1 biofilm shows that there were native bacteria, such as Gemmatimonadetes, Actinobacteria, Proteobacteria and Firmicutes in the sediment that can dechlorinate PCBs. The three treated mesocosm groups (addition of biochar, bioaugmentation with DF1 biofilm and liquid DF1 culture) all can improve dechlorination, of 28.09%, 21.30%, and 17.10%, respectively. Those three groups had dechlorination extent higher than negative control (4.60%), and abiotic control (-1.02%). The microbial community analysis indicated that biofilm inoculation improved abundance of DF1 and had a more stable influence on the community than liquid inoculation. Overall, biofilm inoculation and addition of biochar dechlorinate PCBs in sediment efficiently, and polishing treatment is an efficient approach to improve traditional SCMs, while treating the polishing media with bioaugmentation need further study.enDissertationEnvironmental engineeringAdsorptionBioaugmentationBiocharBiofilmBioretentionStormwater