Reliability Evaluation of Common-Cause Failures and Other Interdependencies in Large Reconfigurable Networks
Publication or External Link
This work covers the impact of Interdependencies and CCFs in large repairable networks with possibility of "re-configuration" after a fault and the consequent disconnection of the faulted equipment. Typical networks with these characteristics are the Utilities, e.g. Power Transmission and Distribution Systems, Telecommunication Systems, Gas and Water Utilities, Wi Fi networks. The main issues of the research are: (a) Identification of the specific interdependencies and CCFs in large repairable networks, and (b)Evaluation of their impact on the reliability parameters (load nodes availability, etc.). The research has identified (1) the system and equipment failure modes that are relevant to interdependencies and CCF, and their subsequent effects, and (2) The hidden interdependencies and CCFs relevant to control, supervision and protection systems, and to the automatic change-over systems, that have no impact in normal operation, but that can cause relevant out-of-service when the above automatic systems are called to operate under and after fault conditions. Additionally methods were introduced to include interdependencies and CCFs in the reliability and availability models. The results of the research include a new generalized approach to model the repairable networks for reliability analysis, including Interdependencies/CCFs as a main contributor. The method covers Generalized models for Nodes, Branches and Load nodes; Interdependencies and CCFs on Networks / Components; System Interdependencies/CCFs; Functional Interdependencies/CCFs; Simultaneous and non-simultaneous Interdependencies/CCFs. As an example detailed Interdependency/CCFs analysis and generalized model of an important network structure (a "RING" with load nodes) has been analyzed in detail.