Show simple item record

Development of an Advanced Adhesion Test for Polymer Interfaces

dc.contributor.advisorHan, Bongtaeen_US
dc.contributor.authorVickey, Nathan Andrewen_US
dc.description.abstractThe bond strength of polymer interfaces within packaged microelectronic devices significantly influences their reliability. In the interest of predictive modeling and to facilitate materials selection during the design process, it is highly desirable to be able to distinguish between the adhesive performances of multiple polymer interfaces. However, typical adhesion testing is normally plagued by large deviations in its test results which make drawing statistical conclusions from adhesion strength data difficult. To remedy this, an investigation into the primary sources of variance associated with the pull test was performed. Four primary factors were identified, load alignment, loading rate, bond thickness, and the edge condition. The control of each of these four parameters was targeted during the development of an improved adhesion test technique. The results are an adhesion measurement method which has successfully reduced the scatter in test results from a standard deviation of 50% to approximately 10%.en_US
dc.format.extent2215631 bytes
dc.titleDevelopment of an Advanced Adhesion Test for Polymer Interfacesen_US
dc.contributor.publisherDigital Repository at the University of Marylanden_US
dc.contributor.publisherUniversity of Maryland (College Park, Md.)en_US
dc.contributor.departmentMechanical Engineeringen_US
dc.subject.pqcontrolledEngineering, Mechanicalen_US
dc.subject.pqcontrolledEngineering, Packagingen_US
dc.subject.pqcontrolledEngineering, Mechanicalen_US
dc.subject.pquncontrolledadhesion testingen_US
dc.subject.pquncontrolledpull testen_US
dc.subject.pquncontrolledelectronic packagingen_US
dc.subject.pquncontrolledpolymer interfacesen_US

Files in this item


This item appears in the following Collection(s)

Show simple item record