A. James Clark School of Engineering
Permanent URI for this communityhttp://hdl.handle.net/1903/1654
The collections in this community comprise faculty research works, as well as graduate theses and dissertations.
Browse
3 results
Search Results
Item WIRELESS NETWORK COCAST: COOPERATIVE COMMUNICATIONS WITH SPACE-TIME NETWORK CODING(2011) Lai, Hung-Quoc Duc; Liu, K. J. Ray; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Traditional cooperative communications can greatly improve communication performance. However, transmissions from multiple relay nodes are challenging in practice. Single transmissions using time-division multiple access cause large transmission delay, but simultaneous transmissions from two or more nodes using frequency-division multiple access (FDMA), code-division multiple access (CDMA), or distributed space-time codes are associated with the issues of imperfect frequency and timing synchronization due to the asynchronous nature of cooperation. In this dissertation, we propose a novel concept of wireless network cocast (WNC) and develop its associated space-time network codes (STNCs) to overcome the foretold issues. In WNC networks, each node is allocated a time slot for its transmission and thus the issues of imperfect synchronization are eliminated. To reduce the large transmission delay, each relay node forms a unique signal, a combination of the overheard information, and transmits it to the intended destination. The combining functions at relay nodes form a STNC that ensures full spatial diversity for the transmitted information as in traditional cooperative communications. Various traditional combining techniques are utilized to design the STNCs, including FDMA-like and CDMA-like techniques and transform-based techniques with the use of Hadamard and Vandermonde matrices. However, a major distinction is that the combination of information from different sources happens within a relay node instead of through the air as in traditional cooperative communications. We consider a general case of multiuser relay wireless networks, where user nodes transmit and receive their information to and from a common base node with the assistance from relay nodes. We then apply the STNCs to multiuser cooperative networks, in which the user nodes are also relay nodes helping each other in their transmission. Since the cooperative nodes are distributed around the network, the node locations can be an important aspect of designing a STNC. Therefore, we propose a location-aware WNC scheme to reduce the aggregate transmit power and achieve even power distribution among the user nodes in the network. WNC networks and its associated STNCs provide spatial diversity to dramatically reduce the required transmit power. However, due to the additional processing power in receiving and retransmitting each other's information, not all nodes and WNC networks result in energy efficiency. Therefore, we first examine the power consumption in WNC networks. We then offer a TDMA-based merge process based on coalitional formation games to orderly and efficiently form cooperative groups in WNC networks. The proposed merge process substantially reduces the network power consumption and improves the network lifetime.Item RELAY DEPLOYMENT AND SELECTION IN COOPERATIVE WIRELESS NETWORKS(2009) Ibrahim, Ahmed Salah; Liu, K. J. Ray; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)In cooperative communication protocols, multiple terminals cooperate together forming a virtual antenna array to improve their performance. This thesis contributes to the advancement of cooperative communications by proposing new relay deployment and selection protocols across the network layers that can increase the bandwidth efficiency, reduce the end-to-end transmission power needed to achieve a desired network throughput, maximize the lifetime of a given network, rebuild a disconnected network, and mitigate the effect of channel estimation error and co-channel interference (CCI) problems. Conventional cooperative schemes achieve full diversity order with low bandwidth efficiency. In this thesis we propose a relay selection cooperative protocol, which achieves higher bandwidth efficiency while guaranteeing full diversity order. We provide answers to two main questions, namely, "When to cooperate?" and "Whom to cooperate with?". Moreover, we obtain optimal power allocation and present the tradeoff between the achievable bandwidth efficiency and the corresponding symbol error rate performance. We illustrate that the cooperation gains can be leveraged to the network layer. In particular, we propose a cooperation-based routing algorithm, namely, the Minimum Power Cooperative Routing (MPCR) algorithm, which optimally selects relays while constructing the minimum-power route. Moreover, the MPCR can be implemented in a distributed manner. Using analytical and simulation results, we show that the MPCR algorithm achieves significant power savings compared to the current cooperation-based routing algorithms. We also consider maximizing the network lifetime in sensor networks via deployment of relays. First, we propose a network maintenance algorithm that obtains the best locations for a given set of relays. Second we propose a routing algorithm, namely, Weighted Minimum Power Routing algorithm, that significantly increases the network lifetime due to the efficient utilization of the deployed relays. Finally, we propose an iterative network repair algorithm that finds the minimum number of relays along with their best locations, needed to reconnect a disconnected network. We complete this thesis by investigating the impact of cooperative communications on mitigating the effect of channel estimation error and CCI. We show that cooperative transmission schemes are less susceptible to the effect of channel estimation error or CCI compared to the direct transmission. Finally we study the tradeoff between the timing synchronization error, emerging in the case of having simultaneous transmissions of the cooperating relays, and the channel estimation error, and show their net impact on the system performance.Item Cross-Layer Design for Multi-Antenna Ultra-Wideband Systems(2005-11-28) Siriwongpairat, Wipawee; Liu, K. J. Ray; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Ultra-wideband (UWB) is an emerging technology that offers great promises to satisfy the growing demand for low cost and high-speed digital wireless home networks. The enormous bandwidth available, the potential for high data rates, as well as the potential for small size and low processing power long with low implementation cost, all present a unique opportunity for UWB to become a widely adopted radio solution for future wireless home-networking technology. Nevertheless, in order for UWB devices to coexist with other existing wireless technology, the transmitted power level of UWB is strictly limited by the FCC spectral mask. Such limitation poses significant design challenges to any UWB system. This thesis introduces various means to cope with these design challenges. Advanced technologies including multiple-input multiple-output (MIMO) coding, cooperative communications, and cross-layer design are employed to enhance the performance and coverage range of UWB systems. First a MIMO-coding framework for multi-antenna UWB communication systems is developed. By a technique of band hopping in combination with jointly coding across spatial, temporal, and frequency domains, the proposed scheme is able to exploit all the available spatial and frequency diversity, richly inherent in UWB channels. Then, the UWB performance in realistic UWB channel environments is characterized. The proposed performance analysis successfully captures the unique multipath-rich property and random-clustering phenomenon of UWB channels. Next, a cross-layer channel allocation scheme for UWB multiband OFDM systems is proposed. The proposed scheme optimally allocates subbands, transmitted power, and data rates among users by taking into consideration the performance requirement, the power limitation, as well as the band hopping for users with different data rates. Also, an employment of cooperative communications in UWB systems is proposed to enhance the UWB performance and coverage by exploiting the broadcasting nature of wireless channels and the cooperation among UWB devices. Furthermore, an OFDM cooperative protocol is developed and then applied to enhance the performance of UWB systems. The proposed cooperative protocol not only achieves full diversity but also efficiently utilizes the available bandwidth.