UMD Theses and Dissertations
Permanent URI for this collectionhttp://hdl.handle.net/1903/3
New submissions to the thesis/dissertation collections are added automatically as they are received from the Graduate School. Currently, the Graduate School deposits all theses and dissertations from a given semester after the official graduation date. This means that there may be up to a 4 month delay in the appearance of a given thesis/dissertation in DRUM.
More information is available at Theses and Dissertations at University of Maryland Libraries.
Browse
5 results
Search Results
Item Heterogeneous Ordered Mesoporous Carbon/Metal Oxide Composites for the Electrochemical Energy Storage(2015) Hu, Junkai; Lee, Sang Bok; Chemistry; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The combination of high electronic conductivity, enhanced ionic mobility, and large pore volume make ordered mesoporous carbons (OMCs) promising scaffolds for active energy storage materials. However, mesoporous structures and material morphology need to be more thoroughly addressed. This dissertation discusses the effects of mesoporous structures and material morphologies on the electrochemical performance of OMC/Fe2O3 composites. In the first approach, Fe2O3 was embedded into 1D cylindrical (FDU-15), 2D hexagonal (CMK-3), and 3D bicontinuous (CMK-8) symmetries of mesoporous carbons. These materials were used as supercapacitors for a systematic study of the effects of mesoporous architecture on the structure stability, ion mobility, and performance of mesoporous composite electrodes. The results show that the CMK-3 and CMK-8 synthesized by hard template method can provide high pore volume, but the instability of their mesostructures hinders the total electrode performances upon oxide impregnation. In contrast, the FDU-15 from the soft template method can provide a stable mesostructure. However, it contains much smaller pore volume and surface area, leading to limited metal oxide loading and electrode capacitance. Based on these results, anodized aluminum oxide (AAO) and triblock copolymer F127 are used together as hard and soft templates to fabricate ordered mesoporous carbon nanowires (OMCNW) as a host material for Fe2O3 nanoparticles. The synergistic effects in the dual template strategy provide a high pore volume and surface area, and the structure remains stable even with high metal oxide loading amounts. Additionally, the unique nanowire morphology and mesoporous structure of the OMCNW/Fe2O3 facilitate high ionic mobility in the composite, leading to a large capacitance with good rate capability and cycling stability. I further evaluated this OMCNW/Fe2O3 as a lithium-ion battery (LIB) anode, which showed that the porous symmetry, material morphology, and structure stability are even more important in the rate and cycling performances of LIBs. This work helps further the understanding and optimization of porous structures and morphologies of heterogeneous composites for next generation electrochemical energy storage materials.Item The effect of boric acid on the growth mechanism of electrodeposited metal nanostructures(2014) Graham, Lauren M.; Lee, Sang Bok; Chemistry; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)Electrochemical deposition (ECD) has been a primary method of metal plating for a variety of applications for nearly 100 years. Its popularity is due to its straightforward design, low cost, uniform results, and successful application to a wide range of metals and substrates. Many factors have been shown to influence the composition, texture, and chemical properties of the resultant deposit, such as the current density, the nature and concentration of metal ions, the solution temperature and composition, the applied current waveform, the substrate surface, and agitation. In particular, additives play a complex role in metal deposition due to their ability to greatly alter the growth mechanism and resultant deposit structure. There exists a vast body of work related to the role of additives in various plating solutions, however the majority of investigations on additive effects are focused on planar deposition. For instance, boric acid is a common additive found in nearly all aqueous transition metal plating solutions, yet its influence on metal nanostructure deposition has not been well studied. In this work, we focus on the impact of additives on the growth of metal nanostructures. Specifically, we investigate the role of boric acid in the ECD of nickel nanotubes (NTs) and nanowires (NWs). First, we demonstrate the difference in the growth mechanism and nanostructure morphology in the presence and absence of boric acid with electron microscopy and electrochemical analyses. The ECD conditions are modified to further probe the role of boric acid in the 1D growth of nickel nanostructures. The results confirm the function of boric acid in the surface-directed growth of nickel nanostructures. Second, we employ the boric acid-controlled growth mechanism in the synthesis of advanced nickel nanostructures. The potential for the role of boric acid to be applied to the deposition of additional metals is realized through the synthesis of nickel alloy NTs and NWs. Additionally, the advantage of the boric acid-controlled surface-directed growth mechanism is demonstrated through the straightforward synthesis of segmented nanostructures and a 3D interconnected nanotube network.Item Nanoelectronic Materials(2010) Moore, Tracy; Williams, Ellen D; Physics; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)This thesis explores fabrication methods and characterization of novel materials used in field effect transistors, including metallic nanowires, carbon nanotubes, and graphene. Networks of conductive nanotubes are promising candidates for thin film electrode alternatives due to their desirable transparency, flexibility, and potential for large-scale processing. Silver nanowire and carbon nanotube networks are evaluated for their use as thin film electrode alternatives. Growth of silver nanowires in porous alumina membranes, dispersion onto a variety of substrates, and patterning is described. Metallic carbon nanotubes are suspended in aqueous solutions, airbrushed onto substrates, and patterned. The conductivity and transparency of both networks is evaluated against industry standards. Graphene is a two dimensional gapless semimetal that demonstrates outstanding room temperature mobilities, optical transparency, mechanical strength, and sustains large current densities, all desirable properties for semiconductors used in field effect transistors. Graphene's low on/off ratio and low throughput fabrication techniques have yet to be overcome before it becomes commercially viable. Silicon oxide substrates are common dielectrics in field effect transistors and instrumental in locating mechanically exfoliated graphene. The morphology of two different silicon oxides have been studied statistically with atomic force microscopy and scaling analysis. Tailoring the physical properties of these substrates may provide a control of graphene's electrical properties. A silicon oxide substrate may also be chemically altered to control the properties of graphene. I have modified silicon oxide with self-assembled monolayers with various terminal groups to control the field near the graphene. I characterize the monolayers with atomic force microscopy, x-ray photospectroscopy, and contact angles. I characterize graphene on these substrates using Raman microscopy and transport measurements. Finally, I examine low frequency noise in graphene field effect transistors on conventional silicon oxide substrates. As devices become smaller, the signal to noise ratio of these devices becomes important. Low frequency noise occurs on long time scales and must be controlled for device stability. I measure novel behavior of low frequency noise in multiple graphene devices. The noise may be described electron-hole puddles in the graphene that are caused by trapped charges near the surface of silicon oxide.Item Characterization of Bending Magnetostriction in Iron-Gallium Alloys for Nanowire Sensor Applications(2008-11-21) Downey, Patrick; Flatau, Alison; Aerospace Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)This research explores the possibility of using electrochemically deposited nanowires of magnetostrictive iron-gallium (Galfenol) to mimic the sensing capabilities of biological cilia. Sensor design calls for incorporating Galfenol nanowires cantilevered from a membrane and attached to a conventional magnetic field sensor. As the wires deflect in response to acoustic, airflow, or tactile excitation, the resultant bending stresses induce changes in magnetization that due to the scale of the nanowires offer the potential for excellent spatial resolution and frequency bandwidth. In order to determine the suitability for using Galfenol nanowires in this role, the first task was experimentally characterizing magnetostrictive transduction in bending beam structures, as this means of operation has been unattainable in previous materials research due to low tensile strengths in conventional alloys such as Terfenol-D. Results show that there is an appreciable sensing response from cantilevered Galfenol beams and that this phenomenon can be accurately modeled with an energy based formulation. For progressing experiments to the nanowire scale, a nanomanipulation instrument was designed and constructed that interfaces within a scanning electron microscope and allows for real time characterization of individual wires with diameters near 100 nm. The results of mechanical tensile testing and dynamic resonance identification reveal that the Galfenol nanowires behave similarly to the bulk material with the exception of a large increase in ultimate tensile strength. The magnetic domain structure of the nanowires was theoretically predicted and verified with magnetic force microscopy. An experimental methodology was developed to observe the coupling between bending stress and magnetization that is critical for accurate sensing, and the key results indicate that specific structural modifications need to be made to reduce the anisotropy in the nanowires in order to improve the transduction capabilities. A solution to this problem is presented and final experiments are performed.Item DLC Thin Film Assisted ZnO Nanowires Growth(2008-08-12) YOUNG, SHENG-YU; Salamanca-Riba, Lourdes; Material Science and Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)In this study, we successfully fabricated dense, uniform, vertically aligned ZnO NWs on top of DLC films. The NWs' length, diameter and separation distance were controllable by fine tuning the growth parameters and changing the DLC film deposition temperature. HRTEM examination confirms the NWs were single crystalline with c-axis preferred orientation (lattice parameter c = 0.519 nm). From our experiment results, a ZnO polycrystalline layer forms first and then ZnO NWs grow on top of it. The NW has two sections. The bottom section has wider diameter of 100nm ~ 1 , and the upper thinner section were about 20 ~ 80 nm and it extends for in length. EDS maps by SEM and TEM showed the elemental concentration of the Zn, O and C in NWs. From all the investigations, we established a model of growth mechanism for ZnO NWs growth on DLC film.