A. James Clark School of Engineering
Permanent URI for this community
The collections in this community comprise faculty research works, as well as graduate theses and dissertations.
Browse
Browsing A. James Clark School of Engineering by Subject "3-D fabrication"
Now showing 1 - 1 of 1
Results Per Page
Sort Options
Item Electrostatic MEMS Actuators using Gray-scale Technology(2006-08-30) Morgan, Brian Carl; Ghodssi, Reza; Electrical Engineering; Digital Repository at the University of Maryland; University of Maryland (College Park, Md.)The majority of fabrication techniques used in micro-electro-mechanical systems (MEMS) are planar technologies, which severely limits the structures available during device design. In contrast, the emerging gray-scale technology is an attractive option for batch fabricating 3-D structures in silicon using a single lithography and etching step. While gray-scale technology is extremely versatile, limited research has been done regarding the integration of this technology with other MEMS processes and devices. This work begins with the development of a fundamental empirical model for predicting and designing complex 3-D photoresist structures using a pixilated gray-scale technique. A characterization of the subsequent transfer of such 3-D structures into silicon using deep reactive ion etching (DRIE) is also provided. Two advanced gray-scale techniques are then introduced: First, a double exposure technique was developed to exponentially increase the number of available gray-levels; improving the vertical resolution in photoresist. Second, a design method dubbed compensated aspect ratio dependent etching (CARDE) was created to anticipate feature dependent etch rates observed during gray-scale pattern transfer using deep reactive ion etching (DRIE). The developed gray-scale techniques were used to integrate variable-height components into the actuation mechanism of electrostatic MEMS devices for the first time. In static comb-drives, devices with 3-D comb-fingers were able to demonstrate >34% improvement in displacement resolution by tailoring their force-engagement characteristics. Lower driving voltages were achieved by reducing suspension heights to decrease spring constants (from 7.7N/m to 2.3N/m) without effecting comb-drive force. Variable-height comb-fingers also enabled the development of compact, voltage-controlled electrostatic springs for tuning MEMS resonators. Devices in the low-kHz range demonstrated resonant frequency tuning >17.1% and electrostatic spring constants up to 1.19 N/m (@70V). This experience of integrating 3-D structures within electrostatic actuators culminated in the development of a novel 2-axis optical fiber alignment system using 3-D actuators. Coupled in-plane motion of electrostatic actuators with integrated 3-D wedges was used to deflect an optical fiber both horizontally and vertically. Devices demonstrated switching speeds <1ms, actuation ranges >35μm (in both directions), and alignment resolution <1.25μm. Auto-alignment to fixed indium-phosphide waveguides with <1.6μm resolution in <10 seconds was achieved by optimizing search algorithms.