dc SQUID Phase Qubit

Loading...
Thumbnail Image

Files

umi-umd-5678.pdf (5.38 MB)
No. of downloads: 1103

Publication or External Link

Date

2008-08-06

Citation

DRUM DOI

Abstract

This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID.

Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device.

One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.

Notes

Rights