University of Maryland DRUM  
University of Maryland Digital Repository at the University of Maryland

DRUM >
Theses and Dissertations from UM >
UM Theses and Dissertations >

Please use this identifier to cite or link to this item: http://hdl.handle.net/1903/9608

Title: Correlation of Signals, Noise, and Harmonics in Parallel Analog-to-Digital Converter Arrays
Authors: Lauritzen, Keir Christian
Advisors: Peckerar, Martin
Department/Program: Electrical Engineering
Type: Dissertation
Sponsors: Digital Repository at the University of Maryland
University of Maryland (College Park, Md.)
Keywords: 0544 Engineering, Electronics and Electrical
analog-to-digital converter, arrays, correlation, distortion, noise
Issue Date: 2009
Abstract: Combining M analog-to-digital converters (ADC) in parallel increases the maximum signal-to-noise ratio (SNR) by a factor of M, assuming the noise is uncorrelated from one channel to the next. This allows for a significant increase in SNR over a single ADC; however, noise and harmonic correlation degrade this improvement. ADCs have three sources of noise: thermal (and other random physical processes), sampling, and quantization noise. There are two system components creating harmonics: the sampler and the quantizer. In this thesis, I determine, analytically and experimentally, the degree of correlation between signals, noise, and harmonics in a parallel ADC array. To test the analysis experimentally, I developed a 16-channel test-bed using 16-bit, state-of-the-art ADCs and 16 direct-digital synthesizers as low-noise signal sources. The test bed provides excellent signal isolation between channels and minimal digital noise to enable the measurement of very low levels of correlation. I investigated the feasibility of measuring the very high levels of signal correlation in the presence of channel nonlinearities with different measurement signals. For a completely linear channel, the channel matching is limited by noise. With nonlinearities, the ability to measure the signal correlation depends on the measurement signal. I verified that the thermal noise is uncorrelated across 16 channels as expected. I also demonstrated that sampling noise is fully correlated from channel-to-channel when a common clock drives the ADCs. Efforts to reduce the correlation using two previously developed de-correlation techniques-phase randomization and frequency offsets-successfully reduced the correlated noise by a factor of two. I then demonstrated analytically and experimentally that harmonics from quantizers are largely uncorrelated; however, harmonics from the sampler are largely correlated confirming the need for decorrelation techniques. I demonstrated the impact of the previously developed decorrelation techniques to reduce harmonic correlation and developed two new decorrelation techniques: phase cancellation and clock offsets, which offer significant advantages over phase randomization and frequency offsets. Each technique offers different levels of dynamic range improvement and complexity, allowing for a range of techniques to target the optimal level of decorrelation.
URI: http://hdl.handle.net/1903/9608
Appears in Collections:Electrical & Computer Engineering Theses and Dissertations
UM Theses and Dissertations

Files in This Item:

File Description SizeFormatNo. of Downloads
Lauritzen_umd_0117E_10652.pdf13.13 MBAdobe PDF163View/Open

All items in DRUM are protected by copyright, with all rights reserved.

 

DRUM is brought to you by the University of Maryland Libraries
University of Maryland, College Park, MD 20742-7011 (301)314-1328.
Please send us your comments. -
All Contents